MACE HIGH RATIO ROLLER ROCKERS KIT TO SUIT HOLDEN BUICK LN3 L27 3.8L V6

Product no.: ROC605
$585.00

 

 

Price inc GST | Review Shipping  

Back by popular demand, our 1.9:1 remanufactured high ratio rocker arms are an excellent bang-for-buck modification that will noticeably improve the HP of your Buick 3800. The advantage of using higher ratio rockers is that the same cam lobe profile can produce a greater total valve lift which in turn creates more mid-range to top end power without the need of going through the effort of doing a camshaft upgrade.

In addition to the great performance benefits, the fact that the valve side of the rocker is longer, a larger diameter arc is followed as it moves up and down. This reduces side loading, friction and wear on the valve stems and guides. This is why many high revving NASCAR engines typically run very high rocker ratios of up to 2:1 or higher.

Our Mace rockers are still re-manufactured locally from GM LS factory rockers to ensure our customers are receiving quality Aussie performance products. The factory design was selected over an aftermarket unit because, arguably, they have never been known to fail. The over-engineered structure that GM modeled years ago, although made from stamped steel and slightly on the heavy side, is definitely a proven design. For the little extra material they carry, its without doubt, worth the factor of safety as a failed rocker is catastrophic. Evident with a quick Google search of aftermarket rocker failures.

To install our Mace high ratio rocker arms, all that is required is the removal of the rocker covers which will expose the standard 1.65:1 items. These are then removed and replaced with our performance 1.9:1 units!

 

Key Benefits:

  • No tune required.
  • Expect gains of 15-20kw at the flywheel.
  • Easy DIY installation.
  • Retains the strong and rigid properties of factory rockers.
  • Reduced wear and tear on the valve-train coupled with a noticeable performance improvement.
  • Remanufactured and tested right here in Australia.

 

Contents:

  • 01 X Assembly lubricant
  • 01 X Bolt pack
  • 02 X Pedestal kit
  • 12 X 1.9:1 high ratio rocker
  • 12 X Heavy duty pushrod

Vehicle Fitment Guide

Roller-Rockers-Commodore-ROC605-VFG-Updated

 

Notes:

  • High ratio rockers are not suitable for use with aftermarket cams. Excessive valve lift may cause engine damage.
  • A higher rocker ratio will throw out your valve-train geometry, therefore pushrod length will need to be checked and a new length pushrod sourced to maintain adequate lifter preload. Theoretically, 8.15" pushrods will match a 1.9:1 ratio rocker on stock heads which are included in this kit.
  • Valve spring upgrade recommended for high mileage engines or if revving past the factory limiter.

Customers who bought this product also bought

*

 

 

Prices inc GST | Review Shipping

Browse these categories as well: Roller Rockers, V6, Buick 3.8L V6