MACE 25MM PERFORMANCE MANIFOLD INSULATOR KIT TO SUIT HOLDEN L67 SUPERCHARGED 3.8L V6

Exclusive to Mace Engineering, here we have our design-registered lower manifold insulator to suit the Holden series from VS to VY fitted with L67 Supercharged 3.8L 6 cylinder engine.

What are manifold insulators and what do they do?

Manifold insulators are a thermal insulating spacer that mount between your engine block and intake manifold. Made from a heat blocking composite, our manifold insulators will increase power from your engine by keeping the intake cooler and increase low end torque by increasing runner length.

But how do manifold insulators keep the intake manifold cooler?

Given our manifold insulators are made from a composite material with a thermal conductivity of 0.29 W/m*K as opposed to aluminium, which has a thermal conductivity of 150 W/m*K; The difference works about to be that aluminium conducts heat 500 times higher than our composite material!

Also, with gaskets often made out of steel (thermal conductivity of 20 W/m-K) placed between the upper and lower manifolds being 0.5mm thick, replacing them with a 25mm manifold insulator will conduct an amazing 3,448 times less heat.

Our composite material also exhibits high stiffness and compressive strength, can withstand temperatures up to 150°C, and has a thermal expansion coefficient very similar to aluminium to increase sealing capabilities. In addition, the spacer can also withstand boosted conditions with ease.

Key Benefits:

• Design registered.
• Reduces charge air temperature resulting in better power consistency and detonation prevention.
• Power increase with no undesirable side effects.
• Improved low end torque by increasing runner length.
• Improved fuel economy.
• Easy to install.
• Can be used as a replacement gasket.
• Reusable.
• Proven gains at an affordable price.

Contents:

• ​1 X 25mm Manifold insulator
• 1 X Set of longer bolts
• 1 X 25mm fuel injector extender kit
• 1 X Gasket sealer

Vehicle Fitment Guide

Notes: 

• A 6.35mm manifold insulator can be purchased through another listing.
• Slight modifications to the fuel rail will be needed to install this insulator.
• The original bolts can be reused if this insulator is not used in conjunction with any intercooler.