This standard replacement ignition coil is designed to meet and exceed OEM specifications when it comes to performance and durability. Each ignition coil has been checked and tested so you can be assured of quality fitment every time. This suits a range of Falcons and similar platforms fitted with the Barra 6-cylinder engine.

These coils come with a 3 year/100,000km parts only warranty.

Vehicle Fitment Guide

Note: A set of 6 ignition coils can be purchased through another listing.

This set of 6 standard replacement ignition coils is designed to meet and exceed OEM specifications when it comes to performance and durability. Each ignition coil has been checked and tested so you can be assured of quality fitment every time. This suits a range of Falcons and similar platforms fitted with the Barra 6-cylinder engine.

These coils come with a 3 year/100,000km parts only warranty. 

Vehicle Fitment Guide  

Note: A single ignition coil can be purchased through another listing.

Head bolts play a vital role in the sealing of the combustion chamber, oil/coolant channels and ambient air. Therefore, we recommend our cylinder head bolt set for the task. Having met and exceeded OEM specifications, these quality bolts are suited for standard and mildly modified applications. These are torque-to-yield (TTY) bolts which means they are designed to be tightened past their elastic limit, guaranteeing high and uniform clamping forces. Other benefits include pre-applied sealant to the threads eliminating the use of thread locker and no-retorquing is necessary after correct installation procedures have been followed.

This head bolt set suits Ford vehicles fitted with Barra E-Gas, EcoLPi and Turbo I6 engines.

Contents:

• 14 X Head bolt

Vehicle Fitment Guide

Notes: 

• When torquing up bolts, an accurate torque wrench or angle gauge will be required to achieve correct clamping forces.
• Please follow the torque specifications as recommended by the service manual.
• TTY bolts are only to be used once due to permanent elongation and safety concerns.

Head bolts play a vital role in the sealing of the combustion chamber, oil/coolant channels and ambient air. Therefore, we recommend our cylinder head bolt set for the task. Having met and exceeded OEM specifications, these quality bolts are suited for standard and mildly modified applications. These are torque-to-yield (TTY) bolts which means they are designed to be tightened past their elastic limit, guaranteeing high and uniform clamping forces. Other benefits include pre-applied sealant to the threads eliminating the use of thread locker and no-retorquing is necessary after correct installation procedures have been followed.

This head bolt set suits Ford vehicles fitted with Barra E-Gas, EcoLPi and Turbo I6 engines.

Contents:

• 14 X Head bolt

Vehicle Fitment Guide

Notes: 

• When torquing up bolts, an accurate torque wrench or angle gauge will be required to achieve correct clamping forces.
• Please follow the torque specifications as recommended by the service manual.
• TTY bolts are only to be used once due to permanent elongation and safety concerns.

This MLS (Multi-layer steel) valve regrind gasket set (VRS) is designed to meet and exceed OEM specifications. It has been evaluated right here in Australia so you can be assured of perfect fitment and durability for your Ford Barra 182, 190, 195, E-Gas & EcoLPi 4.0L I6 or any other vehicle equipped with the same motor.

Contents:

• 01 X MLS head gasket
• 01 X Exhaust manifold gasket
• 01 X Intake manifold gasket
• 01 X Rocker cover gasket
• 01 X Timing cover seal set
• 02 X Cam seal
• 24 X Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

This MLS (Multi-layer steel) valve regrind gasket set (VRS) is designed to meet and exceed OEM specifications. It has been evaluated right here in Australia so you can be assured of perfect fitment and durability for your Ford Barra 240T, 245T & 270T Turbo 4.0L I6 or any other vehicle equipped with the same motor.

Contents:

• 01 X MLS head gasket
• 01 X Exhaust manifold gasket
• 01 X Intake manifold gasket
• 01 X Rocker cover gasket
• 01 X Timing cover seal set
• 01 X Turbo fitting gasket kit
• 02 X Cam seal
• 24 X Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

This high quality bottom end gasket kit is ideal for engine rebuilds or just replacing worn and leaky gaskets. This suits a range of Falcons and similar platforms fitted with 6 cylinder engines.

Contents:

• 1 X Front crankshaft seal
• 1 X Rear gasket seal
• 1 X Water pump gasket
• 1 X Oil pan end seal
• 1 X Gasket maker

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

This high quality bottom end gasket kit is ideal for engine rebuilds or just replacing worn and leaky gaskets. This suits a range of Falcons and similar platforms fitted with 6 cylinder engines.

Contents:

• 1 X Front crankshaft seal
• 1 X Rear gasket seal
• 1 X Water pump gasket
• 1 X Oil pan end seal
• 1 X Gasket maker

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

If you own a Ford FG or FG X and are looking to add additional gauges to your vehicle then this gauge holder is for you!

This twin gauge pod comes with a 12-month/20,000km parts only warranty.

Key Features:

• Suits 2 x 52mm (2") gauges.
• Tough ABS plastic construction.
• Low profile and clip in design.
• Easy to install.
• Designed and engineered in Australia.
• Gloss black with textured finish.
• Can be resprayed to match your vehicle's interior.

Contents:

• 1 X Pillar pod
• 1 X Fitting kit
• 1 X Fitting guide
• 2 X Gauge cup

Vehicle Fitment Guide

Note: Gauges are not included.

This standard replacement complete gasket kit features OEM quality gaskets and seals. It is manufactured and packaged right here in Australia so you can be assured of perfect fitment and durability for your late model Falcon, Territory and any other vehicle equipped with the same motor.

Contents:

• 01 X Front crankshaft seal
• 01 X Rear gasket seal
• 01 X Water pump gasket
• 01 X Oil pan end seal
• 01 X Gasket maker
• 01 X MLS head gasket
• 01 X Exhaust manifold gasket
• 01 X Intake manifold gasket
• 01 X Rocker cover gasket
• 01 X Timing cover seal set
• 02 X Cam seal
• 24 X Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.