If you're looking at upgrading the performance of your vehicle without venturing into engine tear downs or expensive tuning packages, then you can't go past our upgraded differential gear sets. Focused on retaining an appetising affordability to performance ratio, installing a shorter differential ratio is probably one of the most noticeable performance modifications you can do without compromising driveability and compliance.

Our Mace differential gear sets have undergone an extensive manufacturing process to ensure OEM-like fitment and durability in any application. The superior finish provides a more consistent, higher quality product as proven in our very own cars!

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• Speedo calibration is required post installation.​
• The M80 is a 3 bolts flange and the M78 is a 4 bolts flange.
• The image is for illustrative purposes only.

To complement our range of performance drive-line components, we also stock quality differential bearing and seal rebuild kits.

This kit contains only the highest quality components to ensure long life and confidence when overhauling your differential.

This solid differential late pinion bearing rebuild kit suits HSV Clubsport VP, VQ, VR and VS series and similar platforms.

Contents:

• 1 X Pinion seal
• 1 X Collapsible spacer
• 1 X 20.9mm Pinion nut
• 1 X Front pinion bearing
• 1 X Rear pinion bearing
• 2 X Carrier bearing

​​Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• Due to the vehicle model's cross-over in years or if you have done a gear set change, it is strongly recommended to check and match your vehicle's pinion nut size with the size given above prior to purchase.
• The early pinion bearing rebuild kit with 17.00mm pinion nut can be purchased through another listing.

Complete your car's under-bonnet layout with the high quality VCM side fascia and infill panels. These panels suit HSV VE WM V8.

VCM Performance has developed left and right hand fascia panels that perfectly integrate with the VE WM VCM OTR cold air intakes. Manufactured from high quality etch finished plastic, the panels fit snugly into existing or new OTR housings via pins, and with factory style push clips securing either end for a completely solid solution. The VCM infill panel is intended to fill the ugly gap left after the removal of the factory airbox in favour of an aftermarket OTR style intake. 

Contents:

• 1 X VCM Side fascia panel set

• 1 X VCM Infill panel

VCM has developed side fascia panels which perfectly integrate with the VCM OTR cold air intake to complete the under bonnet appearance of your HSV VE WM while maintaining the OE quality and finish.

Manufactured from high quality etch finished plastic, the panels fit snugly into existing or new OTR housings via pins, and with factory style push clips securing either end for a completely solid solution.

Contents:

• 1 X Side fascia panel set

VCM has developed side fascia panels which perfectly integrate with the VCM OTR cold air intake to complete the under bonnet appearance of your HSV VF WN while maintaining the OE quality and finish.

Manufactured from high quality etch finished plastic, the panels fit snugly into existing or new OTR housings via pins, and with factory style push clips securing either end for a completely solid solution.

Contents:

• 1 X Side fascia panel set

Complete your car's under-bonnet layout with the high quality VCM side fascia and infill panels. These panels suit HSV VF WN V8.

VCM Performance has developed left and right hand fascia panels that perfectly integrate with the VF WN VCM OTR cold air intakes. Manufactured from high quality etch finished plastic, the panels fit snugly into existing or new OTR housings via pins, and with factory style push clips securing either end for a completely solid solution. The VCM infill panel is intended to fill the ugly gap left after the removal of the factory airbox in favour of an aftermarket OTR style intake. 

Contents:

• 1 X VCM Side fascia panel set
• 1 X VCM Infill panel

The VCM infill panel is intended to fill the ugly gap left after the removal of the factory airbox in favour of an aftermarket OTR style intake.

Contents:

• 1 X Infill panel

Fuel caps are designed to seal your vehicle's fuel system to help prevent evaporation as well as contamination. This CPC fuel cap maintains pressure in the fuel system by a special valve in the cap that can also release pressure if it is too high.

This fuel cap meets the emission requirements and is an ideal replacement for worn out and missing fuel caps in HSV vehicles.

Contents:

• 1 X Fuel cap (Refer to the parts guide)

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Note: Please verify that your cap matches the dimensions of the one in this listing prior to purchase.

To complement our range of performance drive-line components, we also stock quality differential bearing and seal rebuild kits.

This kit contains only the highest quality components to ensure long life and confidence when overhauling your differential.

This solid differential early pinion bearing rebuild kit suits HSV ClubSport VP, VQ, VR and VS series and similar platforms.

Contents:

• 1 X 17.00mm Pinion nut
• 1 X Pinion seal
• 1 X Collapsible spacer
• 1 X Front pinion bearing
• 1 X Rear pinion bearing
• 2 X Carrier bearing

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• Due to the vehicle model's cross-over in years or if you have done a gear set change, it is strongly recommended to check and match your vehicle's pinion nut size with the size given above prior to purchase.
• The late pinion bearing rebuild kit with 20.9mm pinion nut can be purchased through another listing.

Mace Performance Rear main seal housing kit has been flawlessly manufactured from high-quality die-cast aluminium to accommodate all LS model engines. The strength and durability of this kit makes it ideal for replacing a damaged housing and guaranteeing long-lasting performance for your engine.

This Performance Rear main seal housing kit suits HSV vehicles fitted with LS1, LS2, LS3 and LSA Supercharged V8 engines.

Contents:

• 01 X Gasket
• 01 X Rear main plate 
• 01 X Rear main seal
• 12 X Plate to block bolt

Vehicle Fitment Guide

Note: This housing will not fit LSX blocks.