ICE Ignition, an innovative Australian company, specialized in providing exceptional and reliable ignition components for most engines and diverse performance applications.

These ICE ultimate 7mm race 1000 series ignition leads suit Holden Rodeo fitted with the C22NE I4 engine.

Key Features:

• Highest quality spiral wound copper alloy core.
• Premium quality stainless steel cap and plug fittings.
• Extreme temperature silicon insulation and boots.

Contents:

• 1 X 7mm Race 1000 series ignition lead set

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

The cause of an irregular misfire or a stumble under load may be due to a failed component of the ignition system. This Ignition service kit includes everything required to freshen up the ignition system of your vehicle.

This ignition service kit is specifically designed to suit Holden Rodeo fitted with the C22NE I4 engine.

The coils in this kit come with a 3 year/100,000km parts only warranty.

Key Features:

• OEM replacement coils to work with all factory sensors.
• Spark plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance.
• Best quality, low resistance & high suppression spiral wound copper alloy core ignition lead with secure stainless steel cap and plug fittings.

Contents:

• 1 X Mace ignition coil pack
• 4 X Autolite double platinum spark plug
• 4 X ICE 7mm race 1000 series ignition lead

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too loose or too tight, reset the gap.

Premium pre cat O2 sensors are manufactured utilizing proven OE technology and are guaranteed to provide durable and efficient performance.

The pre catalytic oxygen sensor is located before the catalytic converter and directly analyses the emission coming from the engine. It measures the oxygen content in the exhaust gases of an engine. Based on the output, it works together with the electronic control unit (ECU) and fuel injection system to control and manage the fuel being injected into the engine to ensure optimal air-fuel ratio (AFR).

These pre-cat oxygen sensors suit Holden vehicles fitted with 6VD1, L36 and L67 V6 engines.

Features:

• Reduced fuel consumption.
• Less harmful emissions.
• Corrosion-resistant construction.
• Superior design for maximum engine performance.

Specifications:

• Type: Zirconia
• Number of wires: 4
• Location: Pre cat left or right bank

Contents:

• 2 X Pre catalytic oxygen sensor

Vehicle Fitment Guide

Notes:

• Please make sure you are purchasing the correct oxygen sensor by checking the number of wires on your factory sensor. If you are unsure, please contact us for further assistance.
• A pair of 2 wire pre catalytic oxygen sensor to suit Holden VY Ecotec L36 V6 engine can be purchased through another listing.
• Please verify that your oxygen sensor matches the dimensions of the one in this listing prior to purchase. If you are unsure, please contact us for further assistance.

A throttle position sensor (TPS) is located on the throttle body to monitor air intake of an engine. It detects the position of the throttle body butterfly, plate or spindle, and sends it to the ECU. The ECU utilises this input to decide the fuel requirement and spark timing to ensure safe and smooth engine performance.

Premium TPS are designed efficiently to record data with high precision and provide contamination-proof performance.

This throttle position sensor suit Holden vehicles fitted with C16SE, 18LE, C22NE, C22SE and Y24SE I4 engines.

Key Features:

• Strong vibration proof structure.
• Compact design to avoid moisture, dirt and other engine bay contaminants.

Contents:

• 1 X Throttle position sensor

Vehicle Fitment Guide

This Nuline Idler/Tensioner pulley is designed to provide reliability and performance, helping your belt last longer and provide reliable service to your engine for coming years. These Idler/Tensioner pulleys are made of high quality material and utilise the best ball bearings, which are OEM manufactured and feature C3 rated high speed races, high temperature lubricant and heavy duty silicone seals for maximum service life at high RPM's.

This Idler/Tensioner pulley suits Holden Commodores and similar platforms fitted with the V6 engines.

Specifications:

• Type: Flat steel
• Width: 29.50mm
• Outside diameter: 82mm
• Inside diameter: 17mm

Contents:

• 1 X idler/Tensioner pulley

Vehicle Fitment Guide

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Holden vehicles fitted with 6VD1 and 6VE1 V6 engines.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Holden Rodeo fitted with the 6VD1 V6 engine.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Holden vehicles fitted with the I4 engines.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Holden vehicles fitted with the I4 engines.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Holden Rodeo fitted with 4ZE1, 4ZD1, C22NE, 4JA1, 4JB1-T and 4JH1-T Turbo Diesel I4 engines.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide