This standard replacement complete gasket kit features OEM quality gaskets and seals. It is manufactured and packaged right here in Australia so you can be assured of perfect fitment and durability for your late model Falcon, Territory and any other vehicle equipped with the same motor.

Contents:

• 01 X Front crankshaft seal
• 01 X Rear gasket seal
• 01 X Water pump gasket
• 01 X Sump gasket
• 01 X MLS head gasket
• 01 X Exhaust manifold gasket
• 01 X Intake manifold gasket
• 01 X Timing cover seal set
• 01 X Rocker cover gasket
• 02 X Cam seal
• 24 X Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

This standard replacement complete gasket kit features OEM quality gaskets and seals. It is manufactured and packaged right here in Australia so you can be assured of perfect fitment and durability for your late model Falcon, Territory and any other vehicle equipped with the same motor.

Contents:

• 01 X Front crankshaft seal
• 01 X Rear gasket seal
• 01 X Water pump gasket
• 01 X Oil pan end seal
• 01 X Gasket maker​
• 01 X MLS head gasket​
• 01 X Exhaust manifold gasket
• 01 X Intake manifold gasket
• 01 X Timing cover seal set
• 01 X Turbo fitting gasket kit
• 01 X Rocker cover gasket
• 02 X Cam seal
• 24 X Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

This standard replacement complete gasket kit features OEM quality gaskets and seals. It is manufactured and packaged right here in Australia so you can be assured of perfect fitment and durability for your late model Falcon, Territory and any other vehicle equipped with the same motor.

Contents:

• 01 X Front crankshaft seal
• 01 X Rear gasket seal
• 01 X Water pump gasket
• 01 X Oil pan end seal
• 01 X Gasket maker
• 01 X MLS head gasket
• 01 X Exhaust manifold gasket
• 01 X Intake manifold gasket
• 01 X Rocker cover gasket
• 01 X Timing cover seal set
• 02 X Cam seal
• 24 X Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

This standard replacement complete gasket kit features OEM quality gaskets and seals. It is manufactured and packaged right here in Australia so you can be assured of perfect fitment and durability for your late model Falcon and any other vehicle equipped with the same motor.

Contents:

• 01 X Front crankshaft seal
• 01 X Rear gasket seal
• 01 X Water pump gasket
• 01 X Sump gasket
• 01 X MLS head gasket
• 01 X Exhaust manifold gasket
• 01 X Intake manifold gasket
• 01 X Timing cover seal set
• 01 X Turbo fitting gasket kit
• 01 X Rocker cover gasket
• 02 X Cam seal
• 24 X Valve stem seal
• Other small gaskets & seals

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

If you think you've gone as far as you can with bolt-on mods or are rebuilding your late model Falcon, it's time to consider the benefits that only high-performance camshafts can bring.
Crow Cams have developed a series of top end camshafts for your naturally aspirated Ford Falcon 6 cylinder. These are designed to deliver real-world horsepower gains depending on exhaust, induction system, compression ratio, fuel system, injectors and tune.
All our cams are new, so there is no need for change-over or deposit and we have a range to suit all sorts of models and applications.

Contents:

• 2 X Crow Cams camshaft

Camshaft Specifications

CAM637: Mild performance street cams, great mid-range and upper RPM, can be used with standard valve springs, full exhaust system, high-stall (auto only) and ECU recalibration required.

CAM638: Performance street cams, strong mid-range and upper RPM, needs performance valve springs, full exhaust, high stall & ECU recalibration.

CAM639: High performance street cams, great mid-range and upper RPM, needs performance valve springs, full exhaust, high stall & ECU recalibration. Piston to valve clearance should be checked.

CAM640: Hi performance street /strip cams, great upper RPM range, needs performance valve springs, full exhaust, high stall, vernier gears & ECU recalibration.
CAM641: Street /strip application, worked engines only, needs performance valve springs, full exhaust, high stall, vernier gears, head work & ECU recalibration.

CAM642: Race application only not recommended for street use.

CAM680: BA-BF ONLY - Mild performance cams, good mid range, choppy idle, can be used with standard valve springs, full exhaust system and ECU recalibration required.

Please select the part number you require from the drop down menu.

Notes:

• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• We have all gaskets available through other ads.
• Image is for display purposes only.

If you think you've gone as far as you can with bolt-on mods or are rebuilding your late model Falcon, it's time to consider the benefits that only high-performance camshafts can bring.
Crow Cams have developed a series of top end camshafts for your Ford Falcon turbo 6 cylinder. These are designed to deliver real-world horsepower gains depending on exhaust, induction system, compression ratio, fuel system, injectors and tune.
All our cams are new, so there is no need for change-over or deposit and we have a range to suit all sorts of models and applications.

Contents:

• 2 X Crow Cams Camshafts

Camshaft Specifications

CAM644: BA-FGX - Street/strip application,needs performance valve springs, full exhaust, high stall, vernier gears & ECU recalibration.

CAM681: BA-BF ONLY - Mild performance cams, good mid range, choppy idle, can be used with standard valve springs, full exhaust system and ECU recalibration required.

Please select the part number you require from the drop down menu.

Notes:

• These cams are recommended for turbo applications only.
• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• We have all gaskets available through other ads.
• Image is for display purposes only.

These top quality camshafts are street-friendly with a tractable RPM range and offer up to a 35% horsepower gain. If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Ford Falcon 6 Cylinder, it's time to consider the benefits that only a high-performance camshaft can bring.

Crow Cams have developed a series of top end camshafts for your naturally aspirated Ford Falcon 6 cylinder. These are designed to deliver real-world horsepower gains depending on exhaust, induction system, compression ratio, fuel system, injectors and tune.

All our cams are new, so there is no need for change-over or deposit and we have a range to suit all sorts of applications, models and transmissions.

Please refer to the table below for further information camshaft specifications:

Camshaft Specifications

CAM627: High torque cam for EA EB ED engines, can use as standard replacement, no supporting modifications necessary.

CAM629: Mild performance cam for EF EL engines, suits standard computer, needs headers & valve springs.

CAM630: Medium performance cam for EA EB ED EF EL engines, needs computer mods, headers & valve springs.

Note: Not recommended for supercharged or turbocharged applications. These cams will not suit late EL-AU engines from February 1998 onwards. Camshafts to suit late model EL and AU vehicles are available in our other listings.

These top quality camshafts are street-friendly with a tractable RPM range and offer up to a 35% horsepower gain. If you think you've gone as far as you can with bolt-on performance parts or are rebuilding your Ford Falcon 6 Cylinder, it's time to consider the benefits that only a high-performance camshaft can bring.

Crow Cams have developed a series of top end camshafts for your naturally aspirated Ford Falcon 6 cylinder. These are designed to deliver real-world horsepower gains depending on exhaust, induction system, compression ratio, fuel system, injectors and tune.

All our cams are new, so there is no need for change-over or deposit and we have a range to suit all sorts of applications, models and transmissions.

Please refer to the table below for further information camshaft specifications:

Camshaft Specifications

CAM631: High torque cam for AU, can use with LPG - NON VCT.

CAM632: High torque cam for AU, can use with LPG - NON VCT.

CAM633: Medium performance Stage 3 cam for EL - AU, needs computer mods, headers & valve springs.

CAM634: Performance street/strip Stage 4 cam for EL - AU, lopey idle needs valve springs, headers & computer.

Note: Not recommended for supercharged or turbocharged applications. These CAMS don't suit the VCT engines, and they will only suit late model EL engines from February 1998 onwards. Cams to suit earlier model EA EB ED EF EL vehicles, are available in our other listings.

This standard replacement engine mount is designed to meet and exceed OEM specifications, when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This engine mount suits Ford vehicles fitted with Barra 182, 190 and E-Gas I6 engines.

Contents:

• 1 X Hydraulic engine mount

Vehicle Fitment Guide

Note: A pair of engine mounts can be purchased through another listing.

This standard replacement engine mount is designed to meet and exceed OEM specifications, when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This engine mount suits Ford falcon fitted with the I6 engines.

Contents:

• 1 X Hydraulic engine mount

Vehicle Fitment Guide