(0)
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CALAIS VS VT VX VY L67 SUPERCHARGED 3.8L V6
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CAPRICE VS WH L67 SUPERCHARGED 3.8L V6
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN COMMODORE VT VX VY L67 SUPERCHARGED 3.8L V6
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN MONARO V2 L67 SUPERCHARGED 3.8L V6
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN STATESMAN VS WH WK L67 SUPERCHARGED 3.8L V6
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HSV XU6 VT VX L67 SUPERCHARGED 3.8L V6
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HSV GRANGE WH L67 SUPERCHARGED 3.8L V6
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 8 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN ADVENTRA VY VZ LS1 5.7L V8
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 8 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CALAIS VT VX VY VZ LS1 5.7L V8
Mace Engineering Products Fuel Delivery Fuel Injectors SET OF 8 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CAPRICE WH WK WL LS1 5.7L V8
SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CALAIS VS VT VX VY L67 SUPERCHARGED 3.8L V6
Product no.: INJ604-A
These genuine Bosch fuel injectors are the OEM proprietary part for the GM Holden 3.8L V6 supercharged engines. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc/min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Note: A tune is mandatory if you are upgrading to these injectors.
Customers who bought this product also bought
Browse these categories as well: Fuel Injectors, Calais, VS, VT, VX, VY
SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CAPRICE VS WH L67 SUPERCHARGED 3.8L V6
Product no.: INJ604-B
These genuine Bosch fuel injectors are the OEM proprietary part for the GM Holden 3.8L V6 supercharged engines. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc/min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Note: A tune is mandatory if you are upgrading to these injectors.
Customers who bought this product also bought
PERFORMANCE LOWER INTAKE MANIFOLD GASKET KIT TO SUIT HOLDEN ECOTEC L36 L67 SUPERCHARGED 3.8L V6
$90.00
*
|
 |
 |
 |
 |
 |
Browse these categories as well: Fuel Injectors, Caprice, VS, WH
SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN COMMODORE VT VX VY L67 SUPERCHARGED 3.8L V6
Product no.: INJ604-C
These genuine Bosch fuel injectors are the OEM proprietary part for the GM Holden 3.8L V6 supercharged engines. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc/min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Note: A tune is mandatory if you are upgrading to these injectors.
Customers who bought this product also bought
Browse these categories as well: Fuel Injectors, Commodore, VT, VX, VY
SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN MONARO V2 L67 SUPERCHARGED 3.8L V6
Product no.: INJ604-D
These genuine Bosch fuel injectors are the OEM proprietary part for the GM Holden 3.8L V6 supercharged engines. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc/min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Note: A tune is mandatory if you are upgrading to these injectors.
Customers who bought this product also bought
Browse these categories as well: Fuel Injectors, Monaro, V2
SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN STATESMAN VS WH WK L67 SUPERCHARGED 3.8L V6
Product no.: INJ604-E
These genuine Bosch fuel injectors are the OEM proprietary part for the GM Holden 3.8L V6 supercharged engines. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc/min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Note: A tune is mandatory if you are upgrading to these injectors.
SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HSV XU6 VT VX L67 SUPERCHARGED 3.8L V6
Product no.: INJ605-A
These genuine Bosch fuel injectors are the OEM proprietary part for the GM HSV 3.8L V6 supercharged engines. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc/min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Note: A tune is mandatory if you are upgrading to these injectors.
Customers who bought this product also bought
Browse these categories as well: Fuel Injectors, XU6, VT, VX
SET OF 6 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HSV GRANGE WH L67 SUPERCHARGED 3.8L V6
Product no.: INJ605-B
These genuine Bosch fuel injectors are the OEM proprietary part for the GM HSV 3.8L V6 supercharged engines. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc/min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Note: A tune is mandatory if you are upgrading to these injectors.
SET OF 8 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN ADVENTRA VY VZ LS1 5.7L V8
Product no.: INJ801-A
These genuine Bosch fuel injectors serve as a great upgrade for Gen III LS1 5.7L V8s. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc /min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Notes:
- A tune is mandatory if you are upgrading to these injectors.
- These injectors are also compatible with the Holden 5.0L but an additional groove for the injector clip will need to be cut. This is a straight forward modification if using a hack-saw.
SET OF 8 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CALAIS VT VX VY VZ LS1 5.7L V8
Product no.: INJ801-B
These genuine Bosch fuel injectors serve as a great upgrade for Gen III LS1 5.7L V8s. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc /min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Notes:
- A tune is mandatory if you are upgrading to these injectors.
- These injectors are also compatible with the Holden 5.0L but an additional groove for the injector clip will need to be cut. This is a straight forward modification if using a hack-saw.
SET OF 8 BOSCH 36LB/380CC FUEL INJECTORS TO SUIT HOLDEN CAPRICE WH WK WL LS1 5.7L V8
Product no.: INJ801-C
These genuine Bosch fuel injectors serve as a great upgrade for Gen III LS1 5.7L V8s. They use a 4-hole disc fuel delivery nozzle with a wide cone spray for maximum fuel atomization.
Specifications:
- Bosch part number: 0280155868
- Factory flow-matched sets (guaranteed to flow within 1-2% of each other)
- Injector body design: Metal and composite plastic
- Flow rate: 36lbs/hr, 380cc /min at 43.5 psi
- Fuel delivery: 4-hole disc
- Electrical connector type: EV1
- Length: 73 mm
- Body diameter: 16 mm
- O-rings: Top and bottom
- O-ring diameter: 14.5 mm
- Resistance: 12 Ohms
- Latency (dead time): 12 volts, 0.621 ms; 14 volts, 0.391 ms
These fuel injectors also make a great upgrade for other makes and models using the same electrical connector.
Vehicle Fitment Guide
Notes:
- A tune is mandatory if you are upgrading to these injectors.
- These injectors are also compatible with the Holden 5.0L but an additional groove for the injector clip will need to be cut. This is a straight forward modification if using a hack-saw.
Follow Us
Follow us to receive latest updates
Shipping
We do both Australia wide and International Shipping
* Orders typically take 3-5 business days to prepare and process prior to dispatch.
Contact Us
Mace Engineering Group
Phone: 1300 46 6223 (1300 GO MACE)
info@maceengineering.com.au
For more info click here.