Ryco fuel filter is specifically designed to protect the fuel system because it helps to remove contaminants and moisture present in the fuel. Fuel filter's life is dependent on the amount of contaminant present in the vehicle's fuel. It meets and exceeds OE equivalents in the critical areas of efficiency, life and flow.

This fuel filter suits Ford Ranger fitted with WLAT and WEAT Turbo Diesel I4 engine.

Key Features:

• Tested in the Ryco lab to meet and exceed OE equivalents as well as the international ISO and SAE standards.
• Reliable; reduces the risk of breakdowns and towing call-outs.
• Prevents injectors from being clogged, worn and damaged.
• Protects high pressure injectors and fuel pumps from contamination build up or corrosion.
• New vehicle warranty protection.

Contents:

• 1 X Fuel filter

Vehicle Fitment Guide

This filter service kit is designed to meet or exceed the factory requirements and to ensure high efficiency and maximum lifetime. These filters are manufactured from high quality materials to deliver durability and excellent performance. This kit includes all components required to prevent engine wear caused by contaminants such as rust, foreign materials and dust particles. These replacements are extremely important in maintaining the health of your engine.

This filter service kit suits Ford Ranger fitted with WEAT and WLAT Turbo Diesel I4 engines.

Air Filter Specifications:

• Air filter shape: Round straight.
• Outside diameter: 8.625 in (219 mm).
• Height: 6 in (152 mm).

Fuel Filter Specifications:

• Style: Spin on.
• Height: 139.5 mm.
• Body diameter: 86 mm.
• Seal diameter: 63.5 mm.
• Thread: 3/4 X 16.
• Micron rating (@98.7% efficiency): 5.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 3 in (76 mm).
• Height: 3.75 in (95 mm). 

Contents:

• 1 X K&N Air filter
• 1 X K&N Oil filter
• 1 X Ryco Fuel filter

Vehicle Fitment Guide

Note: A separate air/fuel/oil filter can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The fast flowing low viscosity formula of the engine oil included in this kit ensures ultimate fuel efficiency and energy conservation along with maximum protection of your engine. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit suits Ford Ranger fitted with the WEAT and WLAT I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Height: 3.75 in (95 mm).
• Thread specification: 3/4 In. - 16
• Outside diameter: 3 in (76 mm).

Engine Oil Specifications:

• European Constructors: ACEA C2/C3.
• SAE Viscosity Grade: 5W-30.
• Manufacturer Release BMW: BMW LONGLIFE-04, Mercedes Benz 229.31/229.51/229.52, GM-LL-A-025.

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 7 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/7L/1L full synthetic engine oil can be purchased through another listing.
• The image is for illustrative purposes only.

This full service kit is designed to meet or exceed the factory requirements and to ensure high efficiency and maximum lifetime. The filters included in this kit are manufactured from high quality materials to deliver durability and excellent performance. The fast flowing low viscosity formula of the engine oil included in this kit ensures ultimate fuel efficiency and energy conservation along with maximum protection of your engine.

This kit helps in maintaining peak performance, engine reliability and prevents engine wear of the vehicle. These replacements are extremely important in maintaining the health of your engine.

This full service kit suits Ford Ranger fitted with the WEAT and WLAT Turbo Diesel I4 engines.

Air Filter Specifications:

• Air filter shape: Panel.
• Length: 11.625 in (295 mm).
• Width: 9.375 in (238 mm).

Fuel Filter Specifications:

• Style: Spin on.
• Height: 139.5 mm.
• Body diameter: 86 mm.
• Seal diameter: 63.5 mm.
• Thread: 3/4 X 16.
• Micron rating (@98.7% efficiency): 5.

Oil Filter Specifications:

• Style: Cartridge.
• Inside diameter: 2.75 in (70 mm).
• Outside diameter: 2.563 in (65 mm).
• Height: 2.75 in (70 mm).

Engine Oil Specifications:

• European Constructors: ACEA C2/C3.
• SAE Viscosity Grade: 5W-30.
• Manufacturer Release BMW: BMW LONGLIFE-04, Mercedes Benz 229.31/229.51/229.52, GM-LL-A-025.

Contents:

• 1 X K&N Air filter
• 1 X K&N Cartridge oil filter
• 1 X Ryco fuel filter
• 1 X Nulon APEX+ 7 litre full synthetic engine oil

Vehicle Fitment Guide 

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate air/oil/fuel filter can be purchased through another listing.
• A separate 10L/7L/1L full synthetic engine oil can be purchased through another listing.
• The image is for illustrative purposes only.

Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & position to send signals to the engine's computer and convert it to acceleration. Many of these systems have a noticeable delay. EVC throttle controllers by iDrive (rebranded as Ultimate9) reduce this lag and improve response to make the acceleration feel more responsive.

Key Features:

• Eliminates throttle lag.
• Increases throttle response.
• Improves overall drivability.
• Four performance modes.
• Twenty adjustable settings.

Featured Modes:

EVC throttle controllers are equipped with a very intuitive display and settings menu for easy use. There are 4 modes that offer different settings for different driving styles and conditions.

1. Normal Mode (--): Normal mode is simply a replication of the factory settings, essentially the EVC is switched off.

2. Economy Mode (E): Economy mode has 9 settings that reduce the response from the pedal. The higher you go the more dampened your throttle response becomes, by dampening the throttle we can see increases in fuel economy as well as far greater control of your vehicles traction in off-road situations.

3. Ultimate Performance Mode (U): Ultimate performance mode has 9 settings and can be grouped into three stages:

• Ultimate mode 1-3: Everyday driving with smooth acceleration.
• Ultimate mode 4-6: Sportier, more responsive acceleration, great for use around town where short bursts of acceleration are needed.
• Ultimate mode 7-9: Strap yourself in and activate launch control, instant throttle response, beast mode, don’t say we didn’t warn you.

4. Automatic control (AC) Mode: Automatic control is essentially a set and forget mode. Fly-by-wire throttle systems have two potentiometers, one to measure how hard you press the pedal and the other to measure how far you’ve pushed the pedal. In automatic mode the EVC can determine these measures for you and adjust the throttle response to suit.

Contents:

• 1 X EVC electronic throttle controller

Vehicle Fitment Guide

Note: It can take a few days to get used to the EVC's different modes and what works best for the driver. We recommend starting on or around Ultimate mode 4 (U4), this gives the driver plenty of throttle response to notice a substantial difference, without being too much to handle straight out of the box. Once the driver is comfortable with the different Ultimate mode settings, then we recommend experimenting with Automatic and Economy Mode.

The low temperatures in cold weather make it difficult for the fuel to ignite in diesel engines. Thus glow plugs in such temperatures, assist in heating the air-fuel mixture, so that a smooth ignition can be achieved.

NGK glow plugs are specifically designed to provide a reliable engine start and excellent post-glow functionality even in the worst weather conditions. Their unique shell design provides higher heat transfer, exceptional gas-tight sealing, high shear torque, and high resistance to deformation of the heating coils.

These glow plugs suit Ford Ranger fitted with WLAT and WEAT I4 engines.

Key Features:

• Safe start-up from low surrounding temperatures.
• Smooth idling running before engine reaches operating temperature.
• Decreased emissions during warm-up phase.
• High-quality coating on shell for high resistance to corrosion.
• Excellent post-glow function.
• Lower toxic emissions.
• Outstanding reliability owing to advanced manufacturing techniques.

Contents:

• 4 X Glow plug

Vehicle Fitment Guide

Crank case ventilation system allows the vaporized engine oil to escape from the engine crank case, that needs to be passed through the air intake of the vehicle to meet the emission standards. This clogs and damages Inter-cooler, turbocharger and intake manifold of the system.

SAAS catch cans are installed before the air intake system that separate and collect the oil droplets, prolonging the engine life and save you money on maintenance. It combines a fully baffled two stage separation system with a Bronze filter that does an exceptional job of capturing and reducing the amount of oil entering the intake system.

This catch can suits Ford vehicles fitted with the I4 engines.

Key Features:

• Aluminium billet construction.
• 360 degree swivel top mounted banjo for fully adjustable pipe exit.
• 40 Micron bronze filter.
• 500ml capacity.
• Excellent price to performance ratio.
• Fully baffled design.
• Easy to clean.
• SAAS 12 months limited warranty.

Contents:

• 1 X Oil catch tank
• 1 X Drain tap kit​

Vehicle Fitment Guide

Parts Guide

Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.

Notes:

• Do not attempt to install this catch can if you do not have basic mechanical skills. Improper installation can cause severe engine damage and is not covered under warranty.
• It is advised to check the catch tank after driving 1000km to see the amount of oil in the tank. It is important that no oil build-up rises over the internal baffle to the bronze filter.

Crank case ventilation system allows the vaporized engine oil to escape from the engine crank case, that needs to be passed through the air intake of the vehicle to meet the emission standards. This clogs and damages Inter-cooler, turbocharger and intake manifold of the system.

SAAS catch cans are installed before the air intake system that separate and collect the oil droplets, prolonging the engine life and save you money on maintenance. It combines a fully baffled two stage separation system with a Bronze filter that does an exceptional job of capturing and reducing the amount of oil entering the intake system.

This catch can kit suits Ford Ranger fitted with the WEAT Turbo Diesel I4 engine.

Key Features:

• Aluminium billet construction.
• 360 degree swivel top mounted banjo for fully adjustable pipe exit.
• 40 Micron bronze filter.
• 500ml capacity.
• Excellent price to performance ratio.
• Fully baffled design.
• Easy to clean.
• SAAS 12 months limited warranty.

Contents:

• 1 X Oil catch tank
• 1 X Tank bracket
• 1 X Drain tap kit
• 1 X Fitting instruction
• 1 X Hose splitter block
• 1 X 19mm banjo hose fitting
• 2 X 25mm hose fitting
• 2 X 19mm hose
• 2 X 25mm hose clamp
• 2 X M6 bolt/washer
• 3 X 19mm hose fitting
• 4 X 19mm hose clamp
• 5 X Cable tie

 Vehicle Fitment Guide

Parts Guide

Please select from the drop down menu, the part number you require by utilising our fitment guide and parts guide.

Notes:

• This kit is designed to fit to left inner guard behind headlight.
• Do not attempt to install this kit if you do not have basic mechanical skills. Improper installation can cause severe engine damage and is not covered under warranty.
• It is advised to check the catch tank after driving 1000km to see the amount of oil in the tank. It is important that no oil build-up rises over the internal baffle to the bronze filter.
• Refer to the tank maintenance guide provided in the instructions manual for recommended cleaning interval and procedure.

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Ford Ranger fitted with the WEAT Turbo Diesel I4 engine.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Ford vehicles fitted with FE, 4G54, F2, G6, R2, WL, WLAT and WEAT Turbo Diesel I4 engines.

Specifications:

• O/Length: 177mm

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide