This main cap girdle is designed to reduce "capwalk", stop block web flexing and eliminate cracking of the main caps/block webs; this is achieved by boxing in the main caps. Our lightweight girdle evenly distributes load and dampens harmonics by bolting the main cap studs together to create a super strong rectangular cage. The brace nearly doubles the main web support area in the engine. Securing the loose end of the main studs provides stability unequaled even by a 4-bolt mains setup.

In addition, due to the close proximity of the main stud girdle to the crankshaft and rods it also aids in stripping oil off of the crank, which in itself yields a net gain in HP.

Fabricated from 10mm thick high strength aluminium, these girdles are a must for high rpm/high horsepower applications where block rigidity is critical.

Contents:

• 1 X Alloy main cap girdle

Vehicle Fitment Guide

Notes:

• Spacers from the OEM girdle must be re-used and modified to suit.
• May require sump modifications on some models.
• Does not fit AU type alloy sump without modification.
• Custom length main studs are required. These can be purchased from any authorized ARP dealer.
• The image is for illustrative purposes only

These 0.03" oversize pistons are manufactured using silicon alloy combined with T6 heat treatment for maximum durability, strength, damage and scuff resistance. Great for standard rebuilds or lightly modified setups

Contents:

• 6 X Piston

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• Pistons for remaining models can be purchased through other listings.
• Piston rings are not included but can be purchased through other listings.

NPR® (Nippon Piston Ring) was established in 1931 and have six manufacturing plants in Japan and a further 9 plants in USA, Europe and Asia employing 2310 staff. NPR® is recognized as a world leading manufacturer and is original equipment to major Japanese and European automotive companies.

NPR's unrivaled piston rings are manufactured to exacting specifications so proper fit and clearance is achieved. When it comes to enduring the extreme conditions that occur in the combustion chamber while performing such functions as sealing, heat dissipation and oil control, there's no better option than Nippon rings. Perfect for standard rebuilds and lightly modified vehicles.

Specifications:

• Piston ring width: 1.2 x 1.5 x 3.0mm
• Compression rings material: Phosphated
• Oil ring material: Chrome

Contents:

• 06 X Piston ring
• 12 X Compression ring

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• These piston rings only suit EB Fairmont from 4/1992 onwards.
• Please refer to manufacturer’s specifications for the correct installation.
• The image is for illustrative purposes only.

Hastings® advanced engineering provides intricate compression ring and groove combinations that are motor engineered (matched) to meet the unique operating conditions for each particular engine.

Hastings® compression rings, together with Flex-Vent oil rings provide the ultimate piston ring set. Hastings® has perfected the piston ring development process beyond reproach. That’s why the worlds biggest engine manufacturers: Chrysler, Ford, GM and Honda all specify Hastings® as their piston ring of choice.

This piston ring set suits the Ford MPFI VCT 4.0L Straight 6 engines and similar platforms.

Specifications:

• Piston ring width: 1.5 x 1.5 x 3mm
• Top ring material: Cast

Contents:

• 1 X Hastings piston ring set

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• Please refer to manufacturer’s specifications for the correct installation.
• The image is for illustrative purposes only.

Hastings® advanced engineering provides intricate compression ring and groove combinations that are motor engineered (matched) to meet the unique operating conditions for each particular engine. 

Hastings® compression rings, together with Flex-Vent oil rings provide the ultimate piston ring set. Hastings® has perfected the piston ring development process beyond reproach. That’s why the worlds biggest engine manufacturers: Chrysler, Ford, GM and Honda all specify Hastings® as their piston ring of choice.

This piston ring set suits the Ford VCT MPFI 4.0L Straight 6 engines and similar platforms.

Specifications:

• Piston ring width: 1.5 x 1.5 x 3mm
• Material: Molybdenum (Moly)

Contents:

• 1 X Hastings piston ring set

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilizing our vehicle fitment guide and parts guide.

Notes:

• These piston rings only suit EB Fairmont from 4/1992 onwards.

• Please refer to manufacturer’s specifications for the correct installation.
• The image is for illustrative purposes only.

This Timing cover gasket kit is a premium replacement designed to suit Ford Falcons and similar platforms fitted with 3.9L & 4.0L I6 engines. Quality fitment is guaranteed everytime!

Contents:

• 1 X Timing cover seal
• 1 X Head end seal
• 1 X O-ring
• 3 X Timing cover gasket

Vehicle Fitment Guide

Oil caps should be replaced when they no longer seal properly and allow the oil to seep out from the engine. This CPC standard replacement oil cap has been precision designed to perfectly seal the opening used for filling up the engine oil. 

CPC offers a variety of standard and performance oil caps, ranging from metal and plastic standard replacement caps to metal coloured performance oil caps.

Specifications: 

• Height: 32mm.

• Outside diameter: 62mm.

• Thread diameter: 35mm.

Contents:

• 1 X Engine oil cap

Vehicle Fitment Guide

Note: Please verify that your engine oil cap matches the dimensions of the one in this listing prior to purchase.

Different radiator caps maintain your vehicle's cooling system at different pressures, altering the boiling point of the coolant so it is vital that the correct radiator cap is used to pressurize the cooling system. CPC radiator caps are expertly designed to maintain optimum pressure and also to prevent coolant loss. 

This radiator cap suits Ford Falcon vehicles fitted with VCT MPFI I6 or any other vehicle equipped with the same engine.

Specifications:

• Height: 27 mm.
• Outside diameter: 59 mm.
• Thread diameter: 39 mm.
• Pressure rating: 20 PSI, 138 kPa.

Contents:

• 1 X Radiator cap

Vehicle Fitment Guide

Notes:

• Please verify that your radiator cap matches the dimensions of the one in this listing prior to purchase.
• It is recommended that the radiator cap is changed every two years to maintain the optimal performance of the cooling system.

Different radiator caps maintain your vehicle's cooling system at different pressures, altering the boiling point of the coolant so it is vital that the correct radiator cap is used to pressurize the cooling system. CPC radiator caps are expertly designed to maintain optimum pressure and also to prevent coolant loss.

This radiator cap suits Ford Falcon vehicles fitted with Windsor V8 or any other vehicle equipped with the same engine.

Specifications:

• Height: 27 mm.
• Outside diameter: 59 mm.
• Thread diameter: 39 mm.
• Pressure rating: 20 PSI, 138 kPa.

Contents:

• 1 X Radiator cap

Vehicle Fitment Guide

Notes:

• Please verify that your radiator cap matches the dimensions of the one in this listing prior to purchase.
• It is recommended that the radiator cap is changed every two years to maintain the optimal performance of the cooling system.

Suitable for a large range of vehicles, the Gabriel Guardian range of shock absorbers is designed to be a great, no frills replacement for worn standard suspension. Next to brakes and tyres, shock absorbers are one of the most important safety and handling components on any vehicle, however it’s too often overlooked. This Guardian shock absorber is designed to restore the safety and comfort of any car, without any unnecessary expense. This shock absorber features a chromed piston rod and leak-proof piston seal for longer lifespan, and is nitrogen filled for excellent response and steering control.

Contents:

• 1 X Rear gas shock absorber

Vehicle Fitment Guide​

Notes:

• This shock suits EA, EB, ED, EF, EL series including Tickford.
• This shock suits EA, EB, ED, EF, EL series excluding rear SLS.
• This shock suits AU.I, AU.II, AU.III series excluding IRS.
• Pair of rear gas shock absorbers can be purchased through another listing.
• The image is for illustrative purposes only.
• Please note that the color of the product you'll receive might be different from the one shown in the image. If you are after a particular color, please check with us before making a purchase.