This Mace heavy duty timing chain kit can help restore lost horsepower and quieten valve-train noise depending on how worn your current timing chain set is. It is a valuable addition to any sort of engine rebuild. The heavy duty tensioner included in this kit increases the spring pressure. Our timing chain kit has been checked and evaluated so you can be assured of quality fitment and performance every time.

This performance timing chain kit suits Ford vehicles fitted with the Barra 4.0L I6 engines.

Contents:

• 1 X Billet timing parabolic arm
• 1 X Heavy duty chain thicker link arms
• 1 X Heavy duty modded tensioner
• 1 X Chromoly upgraded moly Pivot
• 1 X Front main oil seal
• 1 X Water pump gasket
• 1 X Assembly lube
• 2 X Guide
• 2 X Timing cover gasket

Vehicle Fitment Guide

Note: The image is for illustrative purposes only.

This set of 6 standard replacement ignition coils is designed to meet and exceed OEM specifications when it comes to performance and durability. Each ignition coil has been checked and tested so you can be assured of quality fitment every time. This suits a range of Falcons and similar platforms fitted with the Barra 6 cylinder engine including turbo and LPG variants.

These coils come with a 3 year/100,000km parts only warranty.

Vehicle Fitment Guide

Note: A single coil can be purchased from another ad. 

This standard replacement ignition coil is designed to meet and exceed OEM specifications when it comes to performance and durability. Each ignition coil has been checked and tested so you can be assured of quality fitment every time. This suits a range of Falcons and similar platforms fitted with the Barra 6 cylinder engine including turbo and LPG variants.

This coil comes with a 3 year/100,000km parts only warranty.

Vehicle Fitment Guide

Note: A set of 6 coils can be purchased from another ad.

If you own a Ford Falcon BA or BF and are looking to add additional gauges to your dash then this gauge holder is for you! It clips into the original plastic cover on the dash and sleek design means it doesn’t ruin your car's factory interior appearance. Suited to work with 52mm gauges it provides 2 additional mounting locations for aftermarket gauges.

Features & Benefits

• Suits 52mm gauges
• Can hold 2 gauges
• ​Grey in color
• Clip in design
• Easy to install

There are rules and regulations that cover the installation of aftermarket components in Australian road vehicles. As these rules differ from state to state, please check with your local transport authority for further information.

Vehicle Fitment Guide

Note: Guage Pod for 6 Cylinders BA or BF can be purchased from another ad.

If you own a Ford Falcon BA or BF and are looking to add additional gauges to your dash then this gauge holder is for you! It clips into the original plastic cover on the dash and sleek design means it doesn’t ruin your car's factory interior appearance. Suited to work with 52mm gauges it provides 2 additional mounting locations for aftermarket gauges.

Features & Benefits:

• Suits 52mm gauges
• Can hold 2 gauges
• Grey in color
• Clip in design
• Easy to install

There are rules and regulations that cover the installation of aftermarket components in Australian road vehicles. As these rules differ from state to state, please check with your local transport authority for further information.

Vehicle Fitment Guide

Note: Guage Pod for 8 Cylinders BA or BF can be purchased from another ad.

If you think you've gone as far as you can with bolt-on mods or are rebuilding your late model Falcon, it's time to consider the benefits that only high-performance camshafts can bring.
Crow Cams have developed a series of top end camshafts for your naturally aspirated Ford Falcon 6 cylinder. These are designed to deliver real-world horsepower gains depending on exhaust, induction system, compression ratio, fuel system, injectors and tune.
All our cams are new, so there is no need for change-over or deposit and we have a range to suit all sorts of models and applications.

Contents:

• 2 X Crow Cams camshaft

Camshaft Specifications

CAM637: Mild performance street cams, great mid-range and upper RPM, can be used with standard valve springs, full exhaust system, high-stall (auto only) and ECU recalibration required.

CAM638: Performance street cams, strong mid-range and upper RPM, needs performance valve springs, full exhaust, high stall & ECU recalibration.

CAM639: High performance street cams, great mid-range and upper RPM, needs performance valve springs, full exhaust, high stall & ECU recalibration. Piston to valve clearance should be checked.

CAM640: Hi performance street /strip cams, great upper RPM range, needs performance valve springs, full exhaust, high stall, vernier gears & ECU recalibration.
CAM641: Street /strip application, worked engines only, needs performance valve springs, full exhaust, high stall, vernier gears, head work & ECU recalibration.

CAM642: Race application only not recommended for street use.

CAM680: BA-BF ONLY - Mild performance cams, good mid range, choppy idle, can be used with standard valve springs, full exhaust system and ECU recalibration required.

Please select the part number you require from the drop down menu.

Notes:

• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• We have all gaskets available through other ads.
• Image is for display purposes only.

If you think you've gone as far as you can with bolt-on mods or are rebuilding your late model Falcon, it's time to consider the benefits that only high-performance camshafts can bring.
Crow Cams have developed a series of top end camshafts for your Ford Falcon turbo 6 cylinder. These are designed to deliver real-world horsepower gains depending on exhaust, induction system, compression ratio, fuel system, injectors and tune.
All our cams are new, so there is no need for change-over or deposit and we have a range to suit all sorts of models and applications.

Contents:

• 2 X Crow Cams Camshafts

Camshaft Specifications

CAM644: BA-FGX - Street/strip application,needs performance valve springs, full exhaust, high stall, vernier gears & ECU recalibration.

CAM681: BA-BF ONLY - Mild performance cams, good mid range, choppy idle, can be used with standard valve springs, full exhaust system and ECU recalibration required.

Please select the part number you require from the drop down menu.

Notes:

• These cams are recommended for turbo applications only.
• We recommend dialing in all aftermarket cams using a degree wheel to ensure that they’re phased correctly with the crankshaft. You can do this by using our 8" or 11" degree wheel listed in other ads.
• We have all gaskets available through other ads.
• Image is for display purposes only.

Exclusive to MACE Engineering, our design-registered 6.35mm (1/4") manifold insulator to suit Ford Barra 220 and 230 V8 engines.

Key benefits:

• Produces a cooler intake charge resulting in more power
• A cooler intake charge also reduces the tendency for detonation, means more ignition timing/boost for more power!
• Improves low end torque by increasing runner length
• Better fuel economy
• Robust insulator material allows it to be re-useable
• No undesirable side effects

What are manifold insulators and what do they do?

Manifold insulators are a thermal insulating spacer that mounts between your upper and lower intake manifold. Made from a heat blocking composite, our manifold insulators will increase power from your engine by keeping the intake cooler, and increase low end torque by increasing runner length.

But how do manifold insulators keep the intake manifold cooler?

Given our manifold insulators are made from a composite material with a thermal conductivity of 0.29 W/m*K as opposed to aluminium, which has a thermal conductivity of 150 W/m*K; The difference works out to be that aluminium conducts heat 500 times higher than our composite material!

Also, with gaskets often made out of steel (20 W/m*K thermal conductivity), placed between the upper and lower manifolds, replacing a .5mm gasket with a 6.35mm insulator will conduct an amazing 688 times less heat (yes, that's over 70,000% reduction!). What this basically means is that it becomes very difficult for the engine to heat up the manifold, which ultimately means more power for extended periods (i.e. considerably fewer heat soak issues)!

Our composite material also exhibits high stiffness and compressive strength, can withstand temperatures of up to nearly 150 degrees celcius, and has a thermal expansion coefficient very similar to aluminium to increase sealing capabilities. In addition, the spacer can also withstand boosted conditions with ease.

Contents:

• Barra 5.4L V8 manifold insulator

• Bolt pack

• Silicone gasket maker

What about Installation?

Installation is straight forward, requiring only the removal of your inlet manifold to install the manifold insulators. We currently don't have any fitting instructions for these insulators given the simplicity of the install.

Vehicle Fitment Guide

This standard replacement engine mount is designed to meet and exceed OEM specifications, when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This engine mount suits Ford vehicles fitted with Barra 182, 190 and E-Gas I6 engines.

Contents:

• 1 X Hydraulic engine mount

Vehicle Fitment Guide

Note: A pair of engine mounts can be purchased through another listing.

This standard replacement engine mount is designed to meet and exceed OEM specifications when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This engine mount suits Ford vehicles fitted with the V8 engines.

Contents:

• 1 X Hydraulic engine mount

Vehicle Fitment Guide

Note: A pair of engine mounts can be purchased through another listing.