This standard replacement engine mount is designed to meet and exceed OEM specifications, when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This engine mount suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Hydraulic engine mount

Vehicle Fitment Guide

Note: A pair of engine mounts can be purchased through another listing.

This pair of standard replacement engine mount is designed to meet and exceed OEM specifications when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This pair of engine mounts suit Holden vehicles fitted with Alloytec LY7, LE0, LW2, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 2 X Hydraulic engine mount

Vehicle Fitment Guide

Note: A single engine mount can be purchased through another listing.

This pair of standard replacement engine mount is designed to meet and exceed OEM specifications when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This pair of engine mounts suit Holden vehicles fitted with Alloytec LY7, LE0, LW2, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 2 X Hydraulic engine mount

Vehicle Fitment Guide

Note: A single engine mount can be purchased through another listing.

This standard replacement engine mount is designed to meet and exceed OEM specifications, when it comes to strength and durability. Each mount has been checked and evaluated so you can be assured of quality fitment every time.

This engine mount suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Hydraulic engine mount

Vehicle Fitment Guide

Note: A pair of engine mounts can be purchased through another listing.

Now have the peace of mind for your LS V8 with our very own, designed in house, Mace Engineering LS trunnion upgrade kit. These trunnion kits replace the factory LS rocker internals that are prone to failure when exposed to extended levels of high rpm, high valve spring pressures and amplified rotation from high-lift camshafts. The OE needle bearing housings can begin to separate from the rocker arm when exposed to these conditions, gradually spitting out all the needle rollers which in turn results in a catastrophe.

Our kits are engineered to provide maximum durability and stiffness in the harshest environments whilst still being super affordable for all enthusiasts. Extra security measures have been taken with the use of extended width trunnions with snap-ring grooves instead of the bearing housings only relying on a press-fit type fixture. You can now rest assured these bearings will hold their ground and truly enjoy the exhilarating feeling your LS V8 delivers.

Contents:

• 16 X Rocker arm upgraded 8620 hardened steel trunnion
• 16 X High tensile re-useable rocker bolt
• 32 X Rocker arm reduced friction heavy duty bearing
• 32 X Rocker arm retaining ring

Vehicle Fitment Guide

Note: A shop press will be required to install the new trunnion kits. We can also provide this service for a small fee.

Our new and innovative harmonic balancer removal tool has never made pulling off the factory balancer so simple. Designed in house using a very comprehensive 3D design package, our 3-jaw setup squarely removes the balancer without causing any damage to surrounding components. 

The main bolt diameter and Rockwell hardness for the relevant assemblies have been carefully researched and selected based off genuine engineering resources. The mammoth M20 thread on the main bolt is the largest compared to any other balancer puller currently on the market, meaning you can rest assured the threads won't strip even whilst removing the most stubborn balancers.

With its superior strength and rigidity, you can remove as many balancers as you like to the point we guarantee it can also be used in an industrial environment without failure.

This unit also features a modular support plate where the jaw set can be readily interchanged with ones of longer and shorter locking arms to further broaden the range of vehicles its compatible with.

Tool Loan:

This tool is also available to be loaned out for $45, but we will also require a $150 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days.

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.  

Notes:

• This tool is only compatible with the factory harmonic balancer. 
• The slots in the modular support plate can also be used to remove balancers from most makes and models as long as the right bolts are sourced.

Our new and innovative harmonic balancer removal tool has never made pulling off the factory balancer so simple. Designed in house using a very comprehensive 3D design package, our 3-jaw setup squarely removes the balancer without causing any damage to surrounding components.

The main bolt diameter and Rockwell hardness for the relevant assemblies have been carefully researched and selected based off genuine engineering resources. The mammoth M20 thread on the main bolt is the largest compared to any other balancer puller currently on the market, meaning you can rest assured the threads won't strip even whilst removing the most stubborn balancers.

With its superior strength and rigidity, you can remove as many balancers as you like to the point we guarantee it can also be used in an industrial environment without failure. 

This unit also features a modular support plate where the jaw set can be readily interchanged with ones of longer and shorter locking arms to further broaden the range of vehicles its compatible with.

Tool Loan:

This tool is also available to be loaned out for $45, but we will also require a $150 bond. The bond will be fully refunded once the tool has been returned in complete working order within 30 days.

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• This tool is only compatible with the factory harmonic balancer.
• The slots in the modular support plate can also be used to remove balancers from most makes and models as long as the right bolts are sourced.

This is a standard replacement drive belt manufactured using EDPM rubber compound that resists cracking and offers increased durability over belts made from neoprene. This is replacement for a range of Holden vehicles fitted with V6 engines including LY7 and LE0.

Please select your required belt from the drop down menu or contact us, if you are unsure. 

VEHICLE FITMENT TABLE

Note: Picture is for illustrative purposes only.

W356

This timing service kit is ideal for when having to replace the infamous timing chains found on late model vehicles fitted with the SIDI V6. As soon as these gaskets are disturbed, which is inevitable during disassembly, their sealing properties basically become ineffective. This would lead to further issues if they were to be re-used. Replacing them with our high quality kit will ensure trouble-free motoring and peace of mind for all.

Contents:

• 01 X LHS rocker cover gasket
• 01 X RHS rocker cover gasket
• 01 X Lower inlet manifold gasket
• 01 X Throttle body O-ring
• 06 X Intake runner O-ring
• 06 X Spark plug seal
• 26 X Rocker cover bolt seal

Vehicle Fitment Guide

Note: Timing service gasket kit for Alloytec and LLT engines can be purchased through another listing.

This inlet manifold gasket kit meets our highest standards of quality and reliability. Every component in this kit is locally manufactured from premium automotive grade material for extended durability and performance to match if not better that of the factory counter-part.

Contents:

• 01 X Lower inlet manifold gasket
• 01 X Throttle body O-ring
• 06 X Intake runner O-ring

Vehicle Fitment Guide

Notes:

• This intake manifold gasket kit is not compatible with LLT V6 variants.
• Timing service gasket kit for SIDI engines can be purchased through another listing.