Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & position to send signals to the engine's computer and convert it to acceleration. Many of these systems have a noticeable delay. EVC throttle controllers by iDrive (rebranded as Ultimate9) reduce this lag and improve response to make the acceleration feel more responsive.

Key Features:

• Eliminates throttle lag.
• Increases throttle response.
• Improves overall drivability.
• Four performance modes.
• Twenty adjustable settings.

Featured Modes:

EVC throttle controllers are equipped with a very intuitive display and settings menu for easy use. There are 4 modes that offer different settings for different driving styles and conditions.

1. Normal Mode (--): Normal mode is simply a replication of the factory settings, essentially the EVC is switched off.

2. Economy Mode (E): Economy mode has 9 settings that reduce the response from the pedal. The higher you go the more dampened your throttle response becomes, by dampening the throttle we can see increases in fuel economy as well as far greater control of your vehicles traction in off-road situations.

3. Ultimate Performance Mode (U): Ultimate performance mode has 9 settings and can be grouped into three stages:

• Ultimate mode 1-3: Everyday driving with smooth acceleration.
• Ultimate mode 4-6: Sportier, more responsive acceleration, great for use around town where short bursts of acceleration are needed.
• Ultimate mode 7-9: Strap yourself in and activate launch control, instant throttle response, beast mode, don’t say we didn’t warn you.

4. Automatic control (AC) Mode: Automatic control is essentially a set and forget mode. Fly-by-wire throttle systems have two potentiometers, one to measure how hard you press the pedal and the other to measure how far you’ve pushed the pedal. In automatic mode the EVC can determine these measures for you and adjust the throttle response to suit.

Contents:

• 1 X EVC electronic throttle controller

Vehicle Fitment Guide

Note: It can take a few days to get used to the EVC’s different modes and what works best for the driver. We recommend starting on or around Ultimate mode 4 (U4), this gives the driver plenty of throttle response to notice a substantial difference, without being too much to handle straight out of the box. Once the driver is comfortable with the different Ultimate mode settings, then we recommend experimenting with Automatic and Economy Mode.

The low temperatures in cold weather make it difficult for the fuel to ignite in diesel engines. Thus glow plugs in such temperatures, assist in heating the air-fuel mixture, so that a smooth ignition can be achieved.

NGK glow plugs are specifically designed to provide a reliable engine start and excellent post-glow functionality even in the worst weather conditions. Their unique shell design provides higher heat transfer, exceptional gas-tight sealing, high shear torque, and high resistance to deformation of the heating coils.

These glow plugs suit Mazda vehicles fitted with RF and R2T Turbo Diesel I4 engines.

Key Features:

• Safe start-up from low surrounding temperatures.
• Smooth idling running before engine reaches operating temperature.
• Decreased emissions during warm-up phase.
• High-quality coating on shell for high resistance to corrosion.
• Excellent post-glow function.
• Lower toxic emissions.
• Outstanding reliability owing to advanced manufacturing techniques.

Contents:

• 4 X Glow plug

Vehicle Fitment Guide

Ryco fuel filter is specifically designed to protect the fuel system because it helps to remove contaminants and moisture present in the fuel. Fuel filter's life is dependent on the amount of contaminant present in the vehicle's fuel. It meets and exceeds OE equivalents in the critical areas of efficiency, life and flow.

This fuel filter suits Mazda vehicles fitted with WLAT, WEAT, RF, R2T, SH-VPTS and SH-VPTR Twin Turbo Diesel I4 engines.

Key Features:

• Tested in the Ryco lab to meet and exceed OE equivalents as well as the international ISO and SAE standards.
• Reliable; reduces the risk of breakdowns and towing call-outs.
• Prevents injectors from being clogged, worn and damaged.
• Protects high pressure injectors and fuel pumps from contamination build up or corrosion.
• New vehicle warranty protection.

Contents:

• 1 X Fuel filter

Vehicle Fitment Guide

Ryco In-tank fuel filters are designed to assist in the protection of the fuel system components as it helps remove contaminants and moisture. The life of a fuel filter is dependent on the amount of contaminant present in the vehicle’s fuel. It meets and exceeds OE equivalents in the critical areas of efficiency, life and flow.

This in-tank fuel filter suits Mazda6 fitted with the L3 I4 engine.

Key Features:

• Tested in the Ryco lab to meet and exceed OE equivalents as well as the international ISO and SAE standards.
• Reliable; reduces the risk of breakdowns and towing call-outs.
• Prevents injectors from being clogged, worn and damaged.
• Protects high pressure injectors and fuel pumps from contamination build up or corrosion.
• New vehicle warranty protection.

Contents:

• 1 X In-tank fuel filter

Vehicle Fitment Guide

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The ultra low SAPS formulation of the included engine oil ensures excellent fuel economy, enhanced performance and utmost wear protection in both everyday and high load conditions. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit has been specifically designed to suit Mazda vehicles fitted with RF and R2T Turbo Diesel I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 3.156 in (80 mm).
• Height: 3.406 in (87 mm).
• Thread specification: M20 X 1.5-6H.

Engine Oil Specifications:

• European Constructors: ACEA C1
• JASO: DL-1
• SAE Viscosity Grade: 5W-30
• Manufacturer Release: FORD WSS-M2C934-B, JAGUAR LAND ROVER STJLR.03.5005

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil

Vehicle Fitment Guide 

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 5L/1L full synthetic engine oil can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit ensures absolute wear resistance, improved fuel economy, less turbocharger deposit build up and extra protection against low speed pre-ignition. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit has been specifically designed to suit Mazda vehicles fitted with L3 and L3-VDT Turbo I4 engines.

Oil Filter Specifications:

• Style: Cartridge.

• Outside diameter: 2.438 in (62 mm).

• Inside diameter: 1.156 in (29 mm).

• Height: 2.844 in (72 mm).

Engine Oil Specifications:

• American Petroleum Institute: API SP

• International Lubricant Specification Advisory Committee: ILSAC GF-6A

• SAE Viscosity Grade: 5W-30

• GM dexos1 (R) Gen 2 approved: License D135AHDE075

• Manufacturer Release Ford: GM 6094M, GM 4718M, Ford WSS-M2C929-A, Fiat 9.55535-CR1

Contents:

• 1 X K&N Oil filter

• 1 X Nulon APEX+ 6 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/6L/5L/1L full synthetic engine oil can be purchased through another listing.

This filter service kit is designed to meet or exceed the factory requirements and to ensure high efficiency and maximum lifetime. These filters are manufactured from high quality materials to deliver durability and excellent performance. This kit includes all components required to prevent engine wear caused by contaminants such as rust, foreign materials and dust particles. These replacements are extremely important in maintaining the health of your engine.

This filter service kit is specifically designed to suit Mazda6 fitted with RF and R2T Turbo Diesel I4 engines.

Air Filter Specifications:

• Air filter shape: Panel.
• Height: 1 in (25 mm).
• Outside length: 12.625 in (321 mm).
• Outside width: 6.875 in (175 mm).

Fuel Filter Specifications:

• Style: Spin on.
• Height: 139.5 mm.
• Body diameter: 86 mm.
• Seal diameter: 63.5 mm.
• Thread: 3/4 X 16.
• Micron rating (@98.7% efficiency): 5.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 3.156 in (80 mm).
• Height: 3.406 in (87 mm).
• Thread specification: M20 X 1.5-6H.

Contents:

• 1 X K&N Air filter
• 1 X K&N Oil filter
• 1 X Ryco fuel filter

 Vehicle Fitment Guide

Note: A separate air/oil/fuel filter can be purchased through another listing.

This full service kit is designed to meet or exceed the factory requirements and to ensure high efficiency and maximum lifetime of the engine. The filters included in this kit are manufactured from high quality materials to deliver durability and excellent performance. This kit includes all components required to prevent engine wear caused by contaminants such as rust, foreign materials and dust particles. The ultra low SAPS formulation of the included engine oil ensures excellent fuel economy, enhanced performance and utmost wear protection in both everyday and high load conditions. These replacements are very necessary to freshen up your engine's performance.

This full service kit is specifically designed to suit Mazda6 fitted with RF and R2T Turbo Diesel I4 engines.

Air Filter Specifications:

• Air filter shape: Panel.
• Height: 1 in (25 mm).
• Outside length: 12.625 in (321 mm).
• Outside width: 6.875 in (175 mm).

Fuel Filter Specifications:

• Style: Spin on.
• Height: 139.5 mm.
• Body diameter: 86 mm.
• Seal diameter: 63.5 mm.
• Thread: 3/4 X 16.
• Micron rating (@98.7% efficiency): 5.​

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 3.156 in (80 mm).
• Height: 3.406 in (87 mm).
• Thread specification: M20 X 1.5-6H.​

Engine Oil Specifications:

• European Constructors: ACEA C1
• JASO: DL-1
• SAE Viscosity Grade: 5W-30
• Manufacturer Release: FORD WSS-M2C934-B, JAGUAR LAND ROVER STJLR.03.5005​

Contents:

• 1 X K&N Air filter
• 1 X K&N Oil filter
• 1 X Ryco fuel filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil
• 1 X Nulon APEX+ 1 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate air/oil/fuel filter can be purchased through another listing.
• A separate 5L/1L full synthetic engine oil can be purchased through another listing.

Control arms connect the wheels to the vehicle frame and govern the vertical travel of the wheels while driving. It helps in keeping the wheels aligned and the tires in good contact with the road, which is crucial for safety and stability.

Wasp control arms are made to the highest standards and outperform their OE counterparts and competitors. They are manufactured from high grade material, carry bushings that are built to last and have a special bonded design for bearing heavy load applications.

This pair of lower control arms suit Mazda6 fitted with L3, L3-VDT and RF Turbo Diesel I4 engines.

Key Features:

• Improves tire life by resolving alignment issues.
• Offers stock up and down travel.
• Rigid and resistant to bending and twisting.
• Corrosion resistant.

Contents:

• 2 X Lower control arm

Vehicle Fitment Guide

Inspired and used within NASCAR, these premium Double Platinum and Iridium spark plugs are for the enthusiasts with high performance applications in mind.

The new Autolite plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance. The ignition is also more focused, which provides better and faster fuel combustion, optimizing the vehicles spark plug performance.

Contents:

• 4 X  Autolite Spark plug

Vehicle Fitment Guide

Parts Guide

Please select the part number you require from the drop down menu by utilising our vehicle fitment guide and parts guide.

Notes:

• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too lose or too tight, reset the gap.
• The images are for illustrative purposes only.