This Platinum bottom end gasket kit meets our highest standards of quality and reliability. Every component in this kit is locally manufactured from premium automotive grade material for extended durability and performance.

This bottom end gasket kit suits Holden Commodores and similar platforms fitted with Ecotec L36 and L67 Supercharged V6 engines (up to 08/2000 engine number VH756061).

Contents:

• 1 X Silicon sump gasket
• 1 X Viton rear main seal
• 1 X Rear main cover gasket
• 1 X Crankshaft seal
• 1 X Oil filter adapter gasket
• 1 X Oil pick up tube gasket
• 1 X Timing cover gasket
• 2 X Water pump gasket
• Necessary seals/washers/o-rings

Vehicle Fitment Guide

Note: Mace bottom end gasket kit to suit Ecotec L36 & L67 from 09/2000, engine number VH756062 onwards, can be purchased through another listing.

This Platinum bottom end gasket kit meets our highest standards of quality and reliability. Every component in this kit is locally manufactured from premium automotive grade material for extended durability and performance.

This bottom end gasket kit suits Holden Commodores and similar platforms fitted with Ecotec L36 and L67 Supercharged V6 engines (up to 08/2000 engine number VH756061).

Contents:

• 1 X Silicon sump gasket
• 1 X Viton rear main seal
• 1 X Rear main cover gasket
• 1 X Crankshaft seal
• 1 X Oil filter adapter gasket
• 1 X Oil pick up tube gasket
• 1 X Timing cover gasket
• 2 X Water pump gasket
• Necessary seals/washers/o-rings

Vehicle Fitment Guide

Note: Mace bottom end gasket kit to suit Ecotec L36 & L67 from 09/2000, engine number VH756062 onwards, can be purchased through another listing.

This Platinum bottom end gasket kit meets our highest standards of quality and reliability. Every component in this kit is locally manufactured from premium automotive grade material for extended durability and performance.

This bottom end gasket kit suits Holden Commodores and similar platforms fitted with Ecotec L36 and L67 Supercharged V6 engines (up to 08/2000 engine number VH756061).

Contents:

• 1 X Silicon sump gasket
• 1 X Viton rear main seal
• 1 X Rear main cover gasket
• 1 X Crankshaft seal
• 1 X Oil filter adapter gasket
• 1 X Oil pick up tube gasket
• 1 X Timing cover gasket
• 2 X Water pump gasket
• Necessary seals/washers/o-rings

Vehicle Fitment Guide

Note: Mace bottom end gasket kit to suit Ecotec L36 & L67 from 09/2000, engine number VH756062 onwards, can be purchased through another listing.

The Mahle bottom end gasket conversion kit has been manufactured to meet the standards of OEM and preventing the leakage of engine oil, coolant, and combustion gases, ensuring the proper functioning and longevity of the engine. They are precisely cut to fit the contours of the engine block and its lower components, forming a tight seal that prevents any unwanted mixing of fluids or gases.

This kit suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LU1, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Drain plug washer
• 1 X Timing cover gasket
• 1 X Rear main plate and seal
• 1 X Water pump gasket and seal
• 1 X Crank seal
• 1 X Oil filter housing gasket
• 1 X Oil pump tube O-ring
• 1 X Silicone gasket maker

Vehicle Fitment Guide

Note:

• This kit does not include the sump gasket and timing cover gasket.
• The silicone gasket maker is used to seal these components to the motor.

The Mahle bottom end gasket conversion kit has been manufactured to meet the standards of OEM and preventing the leakage of engine oil, coolant, and combustion gases, ensuring the proper functioning and longevity of the engine. They are precisely cut to fit the contours of the engine block and its lower components, forming a tight seal that prevents any unwanted mixing of fluids or gases.

This kit suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LU1, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Drain plug washer
• 1 X Timing cover gasket
• 1 X Rear main plate and seal
• 1 X Water pump gasket and seal
• 1 X Crank seal
• 1 X Oil filter housing gasket
• 1 X Oil pump tube O-ring
• 1 X Silicone gasket maker

Vehicle Fitment Guide

Note:

• This kit does not include the sump gasket and timing cover gasket.
• The silicone gasket maker is used to seal these components to the motor.

The Mahle bottom end gasket conversion kit has been manufactured to meet the standards of OEM and preventing the leakage of engine oil, coolant, and combustion gases, ensuring the proper functioning and longevity of the engine. They are precisely cut to fit the contours of the engine block and its lower components, forming a tight seal that prevents any unwanted mixing of fluids or gases.

This kit suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LU1, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Drain plug washer
• 1 X Timing cover gasket
• 1 X Rear main plate and seal
• 1 X Water pump gasket and seal
• 1 X Crank seal
• 1 X Oil filter housing gasket
• 1 X Oil pump tube O-ring
• 1 X Silicone gasket maker

Vehicle Fitment Guide

Note:

• This kit does not include the sump gasket and timing cover gasket.
• The silicone gasket maker is used to seal these components to the motor.

The Mahle bottom end gasket conversion kit has been manufactured to meet the standards of OEM and preventing the leakage of engine oil, coolant, and combustion gases, ensuring the proper functioning and longevity of the engine. They are precisely cut to fit the contours of the engine block and its lower components, forming a tight seal that prevents any unwanted mixing of fluids or gases.

This kit suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LU1, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Drain plug washer
• 1 X Timing cover gasket
• 1 X Rear main plate and seal
• 1 X Water pump gasket and seal
• 1 X Crank seal
• 1 X Oil filter housing gasket
• 1 X Oil pump tube O-ring
• 1 X Silicone gasket maker

Vehicle Fitment Guide

Note:

• This kit does not include the sump gasket and timing cover gasket.
• The silicone gasket maker is used to seal these components to the motor.

The Mahle bottom end gasket conversion kit has been manufactured to meet the standards of OEM and preventing the leakage of engine oil, coolant, and combustion gases, ensuring the proper functioning and longevity of the engine. They are precisely cut to fit the contours of the engine block and its lower components, forming a tight seal that prevents any unwanted mixing of fluids or gases.

This kit suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LU1, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Drain plug washer
• 1 X Timing cover gasket
• 1 X Rear main plate and seal
• 1 X Water pump gasket and seal
• 1 X Crank seal
• 1 X Oil filter housing gasket
• 1 X Oil pump tube O-ring
• 1 X Silicone gasket maker

Vehicle Fitment Guide

Note:

• This kit does not include the sump gasket and timing cover gasket.
• The silicone gasket maker is used to seal these components to the motor.

The Mahle bottom end gasket conversion kit has been manufactured to meet the standards of OEM and preventing the leakage of engine oil, coolant, and combustion gases, ensuring the proper functioning and longevity of the engine. They are precisely cut to fit the contours of the engine block and its lower components, forming a tight seal that prevents any unwanted mixing of fluids or gases.

This kit suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LU1, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Drain plug washer
• 1 X Timing cover gasket
• 1 X Rear main plate and seal
• 1 X Water pump gasket and seal
• 1 X Crank seal
• 1 X Oil filter housing gasket
• 1 X Oil pump tube O-ring
• 1 X Silicone gasket maker

Vehicle Fitment Guide

Note:

• This kit does not include the sump gasket and timing cover gasket.
• The silicone gasket maker is used to seal these components to the motor.

The Mahle bottom end gasket conversion kit has been manufactured to meet the standards of OEM and preventing the leakage of engine oil, coolant, and combustion gases, ensuring the proper functioning and longevity of the engine. They are precisely cut to fit the contours of the engine block and its lower components, forming a tight seal that prevents any unwanted mixing of fluids or gases.

This kit suits Holden vehicles fitted with Alloytec LY7, LE0, LW2, LU1, LWR and SIDI LF1, LFW, LLT, LFX V6 engines.

Contents:

• 1 X Drain plug washer
• 1 X Timing cover gasket
• 1 X Rear main plate and seal
• 1 X Water pump gasket and seal
• 1 X Crank seal
• 1 X Oil filter housing gasket
• 1 X Oil pump tube O-ring
• 1 X Silicone gasket maker

Vehicle Fitment Guide

Note:

• This kit does not include the sump gasket and timing cover gasket.
• The silicone gasket maker is used to seal these components to the motor.