This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit ensures absolute wear resistance, improved fuel economy, less turbocharger deposit build up and extra protection against low speed pre-ignition. The high flow oil filter is designed to maintain peak performance, engine reliability and reduce engine wear by ensuring a consistent flow of oil. These replacements are extremely important in maintaining the health of your engine.

This oil service kit suits Ford Explorer fitted with the 2ZA V8 engine.

Oil Filter Specifications:

• Style: Canister.
• Height: 4 in (102 mm).
• Thread specification: M22 Special Thread x 1.5
• Outside diameter: 3.656 in (93 mm).

Engine Oil Specifications:

• American Petroleum Institute: API SP
• International Lubricant Specification Advisory Committee: ILSAC GF-6A
• SAE Viscosity Grade: 5W-30
• GM dexos1 (R) Gen 2 approved: License D135AHDE075
• Manufacturer Release Ford: GM 6094M, GM 4718M, Ford WSS-M2C929-A, Fiat 9.55535-CR1

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 6 litre full synthetic engine oil
• 1 X Nulon APEX+ 1 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/6L/5L/1L full synthetic engine oil can be purchased through another listing.​​

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit ensures absolute wear resistance, improved fuel economy, less turbocharger deposit build up and extra protection against low speed pre-ignition. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit suits Ford Explorer fitted with the Cyclone V6 engine.

Oil Filter Specifications:

• Style: Canister.
• Height: 4.781 in (121 mm).
• Thread specification: M22 Special Thread x 1.5
• Outside diameter: 3 in (76 mm).

Engine Oil Specifications:

• American Petroleum Institute: API SP
• International Lubricant Specification Advisory Committee: ILSAC GF-6A
• SAE Viscosity Grade: 5W-30
• GM dexos1 (R) Gen 2 approved: License D135AHDE075
• Manufacturer Release Ford: GM 6094M, GM 4718M, Ford WSS-M2C929-A, Fiat 9.55535-CR1

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 6 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/6L/5L/1L full synthetic engine oil can be purchased through another listing.

Ignition coils are a vital component of the ignition system. They are responsible for the transformation of low voltage current coming from the battery into high voltage, enabling the engine to function smoothly. Having quality ignition coils is crucial for maintaining the vehicle's performance. This standard replacement ignition coil pack is designed to meet and exceed OEM specifications when it comes to performance and durability.

This ignition coil pack suits Ford vehicles fitted with 1V MPFI 4.0L V6 engines.

This coil pack comes with a 3 year/100,000km product replacement warranty.

Contents:

• 1 X Ignition coil pack

Vehicle Fitment Guide

Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & position to send signals to the engine's computer and convert it to acceleration. Many of these systems have a noticeable delay. EVC throttle controllers by iDrive (rebranded as Ultimate9) reduce this lag and improve response to make the acceleration feel more responsive.

Key Features:

• Eliminates throttle lag.
• Increases throttle response.
• Improves overall drivability.
• Four performance modes.
• Twenty adjustable settings.

Featured Modes:

EVC throttle controllers are equipped with a very intuitive display and settings menu for easy use. There are 4 modes that offer different settings for different driving styles and conditions.

1. Normal Mode (--): Normal mode is simply a replication of the factory settings, essentially the EVC is switched off.

2. Economy Mode (E): Economy mode has 9 settings that reduce the response from the pedal. The higher you go the more dampened your throttle response becomes, by dampening the throttle we can see increases in fuel economy as well as far greater control of your vehicles traction in off-road situations.

3. Ultimate Performance Mode (U): Ultimate performance mode has 9 settings and can be grouped into three stages:

• Ultimate mode 1-3: Everyday driving with smooth acceleration.
• Ultimate mode 4-6: Sportier, more responsive acceleration, great for use around town where short bursts of acceleration are needed.
• Ultimate mode 7-9: Strap yourself in and activate launch control, instant throttle response, beast mode, don’t say we didn’t warn you.

4. Automatic control (AC) Mode: Automatic control is essentially a set and forget mode. Fly-by-wire throttle systems have two potentiometers, one to measure how hard you press the pedal and the other to measure how far you’ve pushed the pedal. In automatic mode the EVC can determine these measures for you and adjust the throttle response to suit.

Contents:

• 1 X EVC electronic throttle controller

Vehicle Fitment Guide

Note: It can take a few days to get used to the EVC's different modes and what works best for the driver. We recommend starting on or around Ultimate mode 4 (U4), this gives the driver plenty of throttle response to notice a substantial difference, without being too much to handle straight out of the box. Once the driver is comfortable with the different Ultimate mode settings, then we recommend experimenting with Automatic and Economy Mode.

Post cat O2 sensors are manufactured utilizing proven OE technology and are guaranteed to provide durable and efficient performance.

The Post catalytic oxygen sensor is located after the catalytic converter and monitors its efficiency by comparing the exhaust that flows into the and out of the converter. This sensor ensures the lowest possible output of environmentally harmful engine emissions.

These round plug post-cat oxygen sensors suit Ford vehicles fitted with the V8 engines.

Features:

• Less harmful emissions.
• Corrosion-resistant construction.
• Superior design for maximum engine performance.

Specifications:

• Type: Zirconia
•  Number of wires: 4
• Location: Post cat left or right bank

Contents:

• 2 X Post catalytic oxygen sensor

Vehicle Fitment Guide

Note: Please verify that your oxygen sensor matches the dimensions of the one in this listing prior to purchase. If you are unsure, please contact us for further assistance.

Pre cat O2 sensors are manufactured utilizing proven OE technology and are guaranteed to provide durable and efficient performance.

The pre catalytic oxygen sensor is located before the catalytic converter and directly analyses the emission coming from the engine. It measures the oxygen content in the exhaust gases of an engine. Based on the output, it works together with the electronic control unit (ECU) and fuel injection system to control and manage the fuel being injected in to the engine to ensure optimal air-fuel ratio (AFR).

These pre-cat oxygen sensors suit Ford vehicles fitted with MPFI SOHC, LCBB, LCBC, TA and 276DT V6 engines.

Features:

• Reduced fuel consumption.
• Less harmful emissions.
• Corrosion-resistant construction.
• Superior design for maximum engine performance.

Specifications:

• Type: Zirconia
• Number of wires: 4
• Location: Pre cat left or right bank

Contents:

• 2 X Pre catalytic oxygen sensor

Vehicle Fitment Guide

Note: Please verify that your oxygen sensor matches the dimensions of the one in this listing prior to purchase. If you are unsure, please contact us for further assistance.

Premium pre cat O2 sensors are manufactured utilizing proven OE technology and are guaranteed to provide durable and efficient performance.

The Pre catalytic oxygen sensor is located before the catalytic converter and directly analyses the emission coming from the engine. It measures the oxygen content in the exhaust gases of an engine. Based on the output, it works together with the electronic control unit (ECU) and fuel injection system to control and manage the fuel being injected in to the engine to ensure optimal air-fuel ratio (AFR).

These pre-cat oxygen sensors suit Holden vehicles fitted with the Buick L27 V6 engine.

Features:

• Reduced fuel consumption.
• Less harmful emissions.
• Corrosion-resistant construction.
• Superior design for maximum engine performance.

Specifications:

• Type: Zirconia
• Number of wires: 4
• Location: Pre cat left or right bank

Contents:

• 2 X Pre catalytic oxygen sensor

Vehicle Fitment Guide

Note: Please make sure you are purchasing the correct oxygen sensor. If you are unsure, please contact us for further assistance.

Premium pre cat O2 sensors are manufactured utilizing proven OE technology and are guaranteed to provide durable and efficient performance.

The pre catalytic oxygen sensor is located before the catalytic converter and directly analyses the emission coming from the engine. It measures the oxygen content in the exhaust gases of an engine. Based on the output, it works together with the electronic control unit (ECU) and fuel injection system to control and manage the fuel being injected in to the engine to ensure optimal air-fuel ratio (AFR).

These pre-cat oxygen sensors suit Ford vehicles fitted with the 1V MPFI SOHC V6 engines.

Features:

• Reduced fuel consumption.
• Less harmful emissions.
• Corrosion-resistant construction.
• Superior design for maximum engine performance.

Specifications:

• Type: Zirconia
• Number of wires: 4
• Location: Pre cat left or right bank

Contents:

• 2 X Pre catalytic oxygen sensor

Vehicle Fitment Guide

Note: Please make sure you are purchasing the correct oxygen sensor. If you are unsure, please contact us for further assistance.

Post cat O2 sensors are manufactured utilizing proven OE technology and are guaranteed to provide durable and efficient performance.

The Post catalytic oxygen sensor is located after the catalytic converter and monitors its efficiency by comparing the exhaust that flows into the and out of the converter. This sensor ensures the lowest possible output of environmentally harmful engine emissions.

These post-cat oxygen sensors suit Ford vehicles fitted with MPFI SOHC and TA engines.

Features:

• Less harmful emissions.
• Corrosion-resistant construction.
• Superior design for maximum engine performance.

Specifications:

• Type: Zirconia
• Number of wires: 4
•  Location: Post cat left or right bank

Contents:

• 2 X Post catalytic oxygen sensor

Vehicle Fitment Guide

Note: Please verify that your oxygen sensor matches the dimensions of the one in this listing prior to purchase. If you are unsure, please contact us for further assistance.

Pre cat O2 sensors are manufactured utilizing proven OE technology and are guaranteed to provide durable and efficient performance.

The pre catalytic oxygen sensor is located before the catalytic converter and directly analyses the emission coming from the engine. It measures the oxygen content in the exhaust gases of an engine. Based on the output, it works together with the electronic control unit (ECU) and fuel injection system to control and manage the fuel being injected in to the engine to ensure optimal air-fuel ratio (AFR).

These pre-cat oxygen sensors suit Ford vehicles fitted with the V8 engines.

Features:

• Reduced fuel consumption.
• Less harmful emissions.
• Corrosion-resistant construction.
• Superior design for maximum engine performance.

Specifications:

• Type: Zirconia
• Number of wires: 4
• Location: Pre cat left or right bank

Contents:

• 2 X Pre catalytic oxygen sensor

Vehicle Fitment Guide

Note: Please verify that your oxygen sensor matches the dimensions of the one in this listing prior to purchase. If you are unsure, please contact us for further assistance.