This full service kit is designed to meet or exceed the factory requirements and to ensure high efficiency and maximum lifetime of the engine. The filters included in this kit are manufactured from high quality materials to deliver durability and excellent performance. This kit includes all components required to prevent engine wear caused by contaminants such as rust, foreign materials and dust particles. The engine oil included in this kit reduces friction and provides protection against engine wear from cold start to high operating temperature. These replacements are very necessary to freshen up your engine's performance.

This full service kit suits Jeep vehicles fitted with the ECD Turbo Diesel I4 engine.

Air Filter Specifications:

• Air filter shape: Panel.
• Outside length: 13 in (330 mm).
• Outside width: 6.75 in (171 mm).
• Height: 1 in (25 mm).

Oil Filter Specifications:

• Style: Cartridge.
• Inside diameter: 1.531 in (39 mm).
• Outside diameter: 2.75 in (70 mm).
• Height: 5.188 in (132 mm).

Oil Specifications:

• SAE Viscosity Grade: 5W-30
• ACEA: C3
• American Petroleum Institute: SN
• Manufacturer Release Mercedes Benz: MB 229.51
• Manufacturer Release BMW: BMW LL-04
• Manufacturer Release VW: VW504.00, VW507.00 (Approved for Volkswagen, Audi, Skoda and Seat petrol and diesel vehicles within manufacturer warranty periods.)

​Contents:

• 1 X K&N Air filter
• 1 X K&N Cartridge oil filter
• 1 X Ryco fuel filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• A separate 5L/1L engine oil can be purchased through another listing.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• This engine oil is not recommended for heavy duty diesel engines.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate air/oil/fuel filter can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit features an Advanced Fluid Dynamics formula with enhanced additives that provides optimum fuel economy and maximum performance while keeping the emissions low. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit suits Jeep vehicles fitted with the ED3, ED6 and TigerShark I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 3 in (76 mm).
• Height: 3.75 in (95 mm).

Engine Oil Specifications:

• European Constructors: ACEA C5, A1/B1
• SAE Viscosity Grade: 5W-20
• Manufacturer Release: Ford WSS-M2C945-A, Ford WSS-M2C948-B, Jaguar Land Rover STJLR.03.5004

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil
• 1 X Nulon APEX+ 1 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 5L/1L full synthetic engine oil can be purchased through another listing.

Ignition coils are a vital component of the ignition system. They are responsible for the transformation of low voltage current coming from the battery into high voltage, enabling the engine to function smoothly. Having quality ignition coils is crucial for maintaining the vehicle's performance. This standard replacement ignition coil is designed to meet and exceed OEM specifications when it comes to performance and durability.

This ignition coil suits Jeep vehicles fitted with ED3 and ECN I4 engines.

This coil comes with a 3 year/100,000km product replacement warranty.

Contents:

• 1 X Ignition coil

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• A set of 4 ignition coils can be purchased through another listing.

Ignition coils are a vital component of the ignition system. They are responsible for the transformation of low voltage current coming from the battery into high voltage, enabling the engine to function smoothly. Having quality ignition coils is crucial for maintaining the vehicle's performance. These standard replacement ignition coils are designed to meet and exceed OEM specifications when it comes to performance and durability.

These ignition coils suit Jeep vehicles fitted with ED3 and ECN I4 engines.

These coils come with a 3 year/100,000km product replacement warranty.

Contents:

• 4 X Ignition coil

Vehicle Fitment Guide

Note: A single ignition coil can be purchased through another listing.

The cause of an irregular misfire or a stumble under load may be due to a failed component of the ignition system. This Ignition service kit includes everything required to freshen up the ignition system of your vehicle.

This ignition service kit is specifically designed to suit Jeep vehicles fitted with ED3 and ECN I4 engines.

The coils in this kit come with a 3 year/100,000km parts only warranty.

Key Features:

• OEM replacement coils to work with all factory sensors.
• Spark plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance.

Contents:

• 4 X Mace ignition coil
• 4 X Autolite double platinum spark plug

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too loose or too tight, reset the gap.

Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & position to send signals to the engine's computer and convert it to acceleration. Many of these systems have a noticeable delay. EVC throttle controllers by iDrive (rebranded as Ultimate9) reduce this lag and improve response to make the acceleration feel more responsive.

Key Features:

• Eliminates throttle lag.
• Increases throttle response.
• Improves overall drivability.
• Four performance modes.
• Twenty adjustable settings.

Featured Modes:

EVC throttle controllers are equipped with a very intuitive display and settings menu for easy use. There are 4 modes that offer different settings for different driving styles and conditions.

1. Normal Mode (--): Normal mode is simply a replication of the factory settings, essentially the EVC is switched off.

2. Economy Mode (E): Economy mode has 9 settings that reduce the response from the pedal. The higher you go the more dampened your throttle response becomes, by dampening the throttle we can see increases in fuel economy as well as far greater control of your vehicles traction in off-road situations.

3. Ultimate Performance Mode (U): Ultimate performance mode has 9 settings and can be grouped into three stages:

• Ultimate mode 1-3: Everyday driving with smooth acceleration.
• Ultimate mode 4-6: Sportier, more responsive acceleration, great for use around town where short bursts of acceleration are needed.
• Ultimate mode 7-9: Strap yourself in and activate launch control, instant throttle response, beast mode, don’t say we didn’t warn you.

4. Automatic control (AC) Mode: Automatic control is essentially a set and forget mode. Fly-by-wire throttle systems have two potentiometers, one to measure how hard you press the pedal and the other to measure how far you’ve pushed the pedal. In automatic mode the EVC can determine these measures for you and adjust the throttle response to suit.

Contents:

• 1 X EVC electronic throttle controller

Vehicle Fitment Guide

Note: It can take a few days to get used to the EVC’s different modes and what works best for the driver. We recommend starting on or around Ultimate mode 4 (U4), this gives the driver plenty of throttle response to notice a substantial difference, without being too much to handle straight out of the box. Once the driver is comfortable with the different Ultimate mode settings, then we recommend experimenting with Automatic and Economy Mode.

The low temperatures in cold weather make it difficult for the fuel to ignite in diesel engines. Thus glow plugs in such temperatures, assist in heating the air-fuel mixture, so that a smooth ignition can be achieved.

NGK glow plugs are specifically designed to provide a reliable engine start and excellent post-glow functionality even in the worst weather conditions. Their unique shell design provides higher heat transfer, exceptional gas-tight sealing, high shear torque, and high resistance to deformation of the heating coils.

These glow plugs suit Jeep vehicles fitted with the ECD Turbo Diesel I4 engine.

Key Features:

• Safe start-up from low surrounding temperatures.
• Smooth idling running before engine reaches operating temperature.
• Decreased emissions during warm-up phase.
• High-quality coating on shell for high resistance to corrosion.
• Excellent post-glow function.
• Lower toxic emissions.
• Outstanding reliability owing to advanced manufacturing techniques.

Contents:

• 4 X Glow plug

Vehicle Fitment Guide

The sway bar link helps in preventing excessive leaning during turns and strongly connect the sway bar and suspension components to keep the ride operations smooth. A worn or damaged sway bar link can cause the steering wheels to slack, which can affect the handling performance and potentially cause an accident.

Wasp sway bar links are an exceptional quality product that can either be used for repair or as an upgrade solution, as they outwear and outperform the OE due to their superior strength and features.

This pair of front sway bar links suit Jeep vehicles fitted with ED3, ECN and ECD Turbo Diesel I4 engines.

Key Features:

•  Suitable for both city and off-road driving.
• Removes the sway bar link flex.
• Allows the sway bar to adjust and move in maximum positions.
• Consistent performance, free from squeaking and creaking noises.

Contents:

• 2 X Front sway bar link

Vehicle Fitment Guide

Ball joints comprise of a bearing stud and socket which enables pivoting movement in multiple directions to provide precise steering and handling. Worn out ball joints cause vibration, clinking noise, uneven tire wear and ultimately lead to loss of steering control.

Wasp ball joints are manufactured using high quality material which maintains perfect alignment and provides superior performance.

This pair of front lower ball joints suit Jeep vehicles fitted with ECN, ED3 and ECD Turbo Diesel I4 engines.

Key Features:

• A protective encasing prevents dirt from getting into the joint assembly.
• Better greasable design reduces friction, corrosion and extends joint life.
• Heat treated ball studs prevent premature failure and improve fatigue strength.

Contents:

• 2 X Front lower ball joint

Vehicle Fitment Guide

Control arms connect the wheels to the vehicle frame and govern the vertical travel of the wheels while driving. It helps in keeping the wheels aligned and the tires in good contact with the road, which is crucial for safety and stability.

Wasp control arms are made to the highest standards and outperform their OE counterparts and competitors. They are manufactured from high grade material, carry bushings that are built to last and have a special bonded design for bearing heavy load applications.

This pair of lower control arms suit Jeep vehicles fitted with ED3, ECN and ECD Turbo Diesel I4 engines.

Key Features:

• Improves tire life by resolving alignment issues.
• Offers stock up and down travel.
• Rigid and resistant to bending and twisting.
• Corrosion resistant.

Contents:

• 2 X Lower control arm

Vehicle Fitment Guide