This K&N's premium oil filter has become a favourite among consumers for its durability and easy removal. This oil filter uses pleated synthetic-blend filtration media to provide maximum filtering by removing most harmful contaminants and provides consistent oil flow. These oil filters have an anti-drain back valve that eliminates dry starts and prevents oil from draining back into the crankcase during the engine shutdown. K&N uses thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. Each oil filter is laboratory tested individually to ensure mechanical strength, efficiency and capacity.

This oil filter is specifically designed to suit Mitsubishi vehicles fitted with the I4 engines.

Key Features:

• Designed for all synthetic, conventional and blended motor oils.
• 1 inch exposed hex nut for fast and easy wrench-off removal.
• Heavy duty construction for extreme conditions.
• K&N 1 year limited warranty.
• High ability to withstand the service intervals recommended by vehicle manufacturers.

Contents:

• 1 X Oil filter

Vehicle Fitment Guide

Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & position to send signals to the engine's computer and convert it to acceleration. Many of these systems have a noticeable delay. EVC throttle controllers by iDrive (rebranded as Ultimate9) reduce this lag and improve response to make the acceleration feel more responsive.

Key Features:

• Eliminates throttle lag.
• Increases throttle response.
• Improves overall drivability.
• Four performance modes.
• Twenty adjustable settings.

Featured Modes:

EVC throttle controllers are equipped with a very intuitive display and settings menu for easy use. There are 4 modes that offer different settings for different driving styles and conditions.

1. Normal Mode (--): Normal mode is simply a replication of the factory settings, essentially the EVC is switched off.

2. Economy Mode (E): Economy mode has 9 settings that reduce the response from the pedal. The higher you go the more dampened your throttle response becomes, by dampening the throttle we can see increases in fuel economy as well as far greater control of your vehicles traction in off-road situations.

3. Ultimate Performance Mode (U): Ultimate performance mode has 9 settings and can be grouped into three stages:

• Ultimate mode 1-3: Everyday driving with smooth acceleration.
• Ultimate mode 4-6: Sportier, more responsive acceleration, great for use around town where short bursts of acceleration are needed.
• Ultimate mode 7-9: Strap yourself in and activate launch control, instant throttle response, beast mode, don’t say we didn’t warn you.

4. Automatic control (AC) Mode: Automatic control is essentially a set and forget mode. Fly-by-wire throttle systems have two potentiometers, one to measure how hard you press the pedal and the other to measure how far you’ve pushed the pedal. In automatic mode the EVC can determine these measures for you and adjust the throttle response to suit.

Contents:

• 1 X EVC electronic throttle controller

Vehicle Fitment Guide

Note: It can take a few days to get used to the EVC's different modes and what works best for the driver. We recommend starting on or around Ultimate mode 4 (U4), this gives the driver plenty of throttle response to notice a substantial difference, without being too much to handle straight out of the box. Once the driver is comfortable with the different Ultimate mode settings, then we recommend experimenting with Automatic and Economy Mode.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit ensures absolute wear resistance, improved fuel economy, less turbocharger deposit build up and extra protection against low speed pre-ignition. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit suits Mitsubishi Outlander fitted with the 6B31 V6 engine.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 2.688 in (68 mm).
• Height: 3.75 in (95 mm).

Engine Oil Specifications:

• American Petroleum Institute: API SP
• International Lubricant Specification Advisory Committee: ILSAC GF-6A
• SAE Viscosity Grade: 5W-30
• GM dexos1 (R) Gen 2 approved: License D135AHDE075
• Manufacturer Release Ford: GM 6094M, GM 4718M, Ford WSS-M2C929-A, Fiat 9.55535-CR1

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/6L/5L/1L full synthetic engine oil can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit ensures absolute wear resistance, improved fuel economy, less turbocharger deposit build up and extra protection against low speed pre-ignition. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit suits Mitsubishi vehicles fitted with 4G15, 4A91, 4B11, 4B12, 4J11 and 4J12  I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 2.688 in (68 mm).
• Height: 3.75 in (95 mm).

Engine Oil Specifications:

• American Petroleum Institute: API SP
• International Lubricant Specification Advisory Committee: ILSAC GF-6A
• SAE Viscosity Grade: 5W-30
• GM dexos1 (R) Gen 2 approved: License D135AHDE075
• Manufacturer Release Ford: GM 6094M, GM 4718M, Ford WSS-M2C929-A, Fiat 9.55535-CR1

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/6L/5L/1L full synthetic engine oil can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit ensures absolute wear resistance, improved fuel economy, less turbocharger deposit build up and extra protection against low speed pre-ignition. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit suits Mitsubishi Outlander fitted with 4B12 and 4J12 I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 2.688 in (68 mm).
• Height: 2.875 in (73 mm).

Engine Oil Specifications:

• American Petroleum Institute: API SP
• International Lubricant Specification Advisory Committee: ILSAC GF-6A
• SAE Viscosity Grade: 5W-30
• GM dexos1 (R) Gen 2 approved: License D135AHDE075
• Manufacturer Release Ford: GM 6094M, GM 4718M, Ford WSS-M2C929-A, Fiat 9.55535-CR1

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/6L/5L/1L full synthetic engine oil can be purchased through another listing.

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Mitsubishi Outlander fitted with the 6B31 V6 engine.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide

A tie rod end connects the steering rack gearbox to the steering knuckles and bears the load of turning the wheels, hence its proper functionality is vital for the steering comfort & safety of the vehicle.

Wasp tie rod ends are designed to meet the ideal ball-stud articulation angle specified by the OE manufacturer. They are manufactured from high-strength components, offer ultra-precise tolerances, perfect alignment and ensure a simple installation for exact OE like fitment.

This pair of tie rod ends suit Mitsubishi vehicles fitted with 4G64, 4G69, 4B11, 4B12, 4B11T and 4N14 Turbo Diesel I4 engines.

Contents:

• 2 X Tie rod end

Vehicle Fitment Guide

The sway bar link helps in preventing excessive leaning during turns and strongly connect the sway bar and suspension components to keep the ride operations smooth. A worn or damaged sway bar link can cause the steering wheels to slack, which can affect the handling performance and potentially cause an accident.

Wasp sway bar links are an exceptional quality product that can either be used for repair or as an upgrade solution, as they outwear and outperform the OE due to their superior strength and features.

This pair of front sway bar links suit Mitsubishi Outlander fitted with the 6B31 V6 engine.

Key Features:

• Suitable for both city and off-road driving.
• Removes the sway bar link flex.
• Allows the sway bar to adjust and move in maximum positions.
• Consistent performance, free from squeaking and creaking noises.

Contents:

• 2 X Front sway bar link

Vehicle Fitment Guide

The sway bar link helps in preventing excessive leaning during turns and strongly connect the sway bar and suspension components to keep the ride operations smooth. A worn or damaged sway bar link can cause the steering wheels to slack, which can affect the handling performance and potentially cause an accident.

Wasp sway bar links are an exceptional quality product that can either be used for repair or as an upgrade solution, as they outwear and outperform the OE due to their superior strength and features.

This pair of front sway bar links suit Mitsubishi vehicles fitted with the I4 engines.

Key Features:

• Suitable for both city and off-road driving.
• Removes the sway bar link flex.
• Allows the sway bar to adjust and move in maximum positions.
• Consistent performance, free from squeaking and creaking noises.

Contents:

• 2 X Front sway bar link

Vehicle Fitment Guide

Ball joints comprise of a bearing stud and socket which enables pivoting movement in multiple directions to provide precise steering and handling. Worn out ball joints cause vibration, clinking noise, uneven tire wear and ultimately lead to loss of steering control.

Wasp ball joints are manufactured using high quality material which maintains perfect alignment and provides superior performance.

This pair of front lower ball joints suit Mitsubishi vehicles fitted with 4G64, 4G94, 4G69, 4B11, 4B12, 4B11T, 4N13 and 4N14 Turbo Diesel I4 engines.

Key Features:

• A protective encasing prevents dirt from getting into the joint assembly.
• Better greasable design reduces friction, corrosion and extends joint life.
• Heat treated ball studs prevent premature failure and improve fatigue strength.

Contents:

• 2 X Front lower ball joint

Vehicle Fitment Guide