The cause of an irregular misfire or a stumble under load may be due to a failed component of the ignition system. This Ignition service kit includes everything required to freshen up the ignition system of your vehicle.

This ignition service kit is specifically designed to suit Mazda vehicles fitted with L3, L5 and LFDE I4 engines.

The coils in this kit come with a 3 year/100,000km parts only warranty.

Key Features:

• OEM replacement coils to work with all factory sensors.
• Spark plugs ignite more gas and air mixture inside the cylinders to deliver better overall performance.

Contents:

• 4 X Mace ignition coil
• 4 X Autolite double platinum spark plug

Vehicle Fitment Guide

Notes:

• The image is for illustrative purposes only.
• You can contact us if you are unsure about fitment.
• Gap the new spark plugs as recommended in the above fitment guide or car owner's manual. Use a feeler gauge to measure the gap between the center and ground electrode. The gauge should pass through snugly but easily. If too loose or too tight, reset the gap.

Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & position to send signals to the engine's computer and convert it to acceleration. Many of these systems have a noticeable delay. EVC throttle controllers by iDrive (rebranded as Ultimate9) reduce this lag and improve response to make the acceleration feel more responsive.

Key Features:

• Eliminates throttle lag.
• Increases throttle response.
• Improves overall drivability.
• Four performance modes.
• Twenty adjustable settings.

Featured Modes:

EVC throttle controllers are equipped with a very intuitive display and settings menu for easy use. There are 4 modes that offer different settings for different driving styles and conditions.

1. Normal Mode (--): Normal mode is simply a replication of the factory settings, essentially the EVC is switched off.

2. Economy Mode (E): Economy mode has 9 settings that reduce the response from the pedal. The higher you go the more dampened your throttle response becomes, by dampening the throttle we can see increases in fuel economy as well as far greater control of your vehicles traction in off-road situations.

3. Ultimate Performance Mode (U): Ultimate performance mode has 9 settings and can be grouped into three stages:

• Ultimate mode 1-3: Everyday driving with smooth acceleration.
• Ultimate mode 4-6: Sportier, more responsive acceleration, great for use around town where short bursts of acceleration are needed.
• Ultimate mode 7-9: Strap yourself in and activate launch control, instant throttle response, beast mode, don’t say we didn’t warn you.

4. Automatic control (AC) Mode: Automatic control is essentially a set and forget mode. Fly-by-wire throttle systems have two potentiometers, one to measure how hard you press the pedal and the other to measure how far you’ve pushed the pedal. In automatic mode the EVC can determine these measures for you and adjust the throttle response to suit.

Contents:

• 1 X EVC electronic throttle controller

Vehicle Fitment Guide

Note: It can take a few days to get used to the EVC’s different modes and what works best for the driver. We recommend starting on or around Ultimate mode 4 (U4), this gives the driver plenty of throttle response to notice a substantial difference, without being too much to handle straight out of the box. Once the driver is comfortable with the different Ultimate mode settings, then we recommend experimenting with Automatic and Economy Mode.

Modern vehicles rely on 'fly by wire' throttle technology to measure pedal pressure & position to send signals to the engine's computer and convert it to acceleration. Many of these systems have a noticeable delay. EVC throttle controllers by iDrive (rebranded as Ultimate9) reduce this lag and improve response to make the acceleration feel more responsive.

Key Features:

• Eliminates throttle lag.
• Increases throttle response.
• Improves overall drivability.
• Four performance modes.
• Twenty adjustable settings.

Featured Modes:

EVC throttle controllers are equipped with a very intuitive display and settings menu for easy use. There are 4 modes that offer different settings for different driving styles and conditions.

1. Normal Mode (--): Normal mode is simply a replication of the factory settings, essentially the EVC is switched off.

2. Economy Mode (E): Economy mode has 9 settings that reduce the response from the pedal. The higher you go the more dampened your throttle response becomes, by dampening the throttle we can see increases in fuel economy as well as far greater control of your vehicles traction in off-road situations.

3. Ultimate Performance Mode (U): Ultimate performance mode has 9 settings and can be grouped into three stages:

• Ultimate mode 1-3: Everyday driving with smooth acceleration.
• Ultimate mode 4-6: Sportier, more responsive acceleration, great for use around town where short bursts of acceleration are needed.
• Ultimate mode 7-9: Strap yourself in and activate launch control, instant throttle response, beast mode, don’t say we didn’t warn you.

4. Automatic control (AC) Mode: Automatic control is essentially a set and forget mode. Fly-by-wire throttle systems have two potentiometers, one to measure how hard you press the pedal and the other to measure how far you’ve pushed the pedal. In automatic mode the EVC can determine these measures for you and adjust the throttle response to suit.

Contents:

• 1 X EVC electronic throttle controller

Vehicle Fitment Guide

Note: It can take a few days to get used to the EVC’s different modes and what works best for the driver. We recommend starting on or around Ultimate mode 4 (U4), this gives the driver plenty of throttle response to notice a substantial difference, without being too much to handle straight out of the box. Once the driver is comfortable with the different Ultimate mode settings, then we recommend experimenting with Automatic and Economy Mode.

Ryco In-tank fuel filters are designed to assist in the protection of the fuel system components as it helps remove contaminants and moisture. The life of a fuel filter is dependent on the amount of contaminant present in the vehicle’s fuel. It meets and exceeds OE equivalents in the critical areas of efficiency, life and flow.

This in-tank fuel filter suits Mazda MX-5 fitted with the LF-DE I4 engine.

Key Features:

• Tested in the Ryco lab to meet and exceed OE equivalents as well as the international ISO and SAE standards.
• Reliable; reduces the risk of breakdowns and towing call-outs.
• Prevents injectors from being clogged, worn and damaged.
• Protects high pressure injectors and fuel pumps from contamination build up or corrosion.
• New vehicle warranty protection.

Contents:

• 1 X In-tank fuel filter

Vehicle Fitment Guide

This K&N's premium oil filter has become a favourite among consumers for its durability and easy removal. This oil filter uses pleated synthetic-blend filtration media to provide maximum filtering by removing most harmful contaminants and provides consistent oil flow. These oil filters have an anti-drain back valve that eliminates dry starts and prevents oil from draining back into the crankcase during the engine shutdown. K&N uses thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. Each oil filter is laboratory tested individually to ensure mechanical strength, efficiency and capacity.

This oil filter suits Mazda vehicles fitted with the I4 engines.

Key Features:

• Designed for all synthetic, conventional and blended motor oils.
• 1 inch exposed hex nut for fast and easy wrench-off removal.
• Heavy duty construction for extreme conditions.
• K&N 1 year limited warranty.
• High ability to withstand the service intervals recommended by vehicle manufacturers.

Contents:

• 1 X Oil filter

Vehicle Fitment Guide

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit ensures absolute wear resistance, improved fuel economy, less turbocharger deposit build up and extra protection against low speed pre-ignition. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit has been specifically designed to suit Mazda vehicles fitted with LF-DE, L3, L3-VDT and L5 I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 3 in (76 mm).
• Height: 3.75 in (95 mm).
• Thread specification: 3/4 in - 16.

Engine Oil Specifications:

• American Petroleum Institute: API SP
• International Lubricant Specification Advisory Committee: ILSAC GF-6A
• SAE Viscosity Grade: 5W-30
• GM dexos1 (R) Gen 2 approved: License D135AHDE075
• Manufacturer Release Ford: GM 6094M, GM 4718M, Ford WSS-M2C929-A, Fiat 9.55535-CR1

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 6 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 10L/6L/5L/1L full synthetic engine oil can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. Advanced Fluid Dynamics formula of the engine oil included in this kit reduces friction and provides absolute protection against engine wear from cold start to high operating temperature. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit has been specifically designed to suit Mazda vehicles fitted with 4G54, B3, B6, B6T, B6ZE, BP, BPT, F8 and FE I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 3.156 in (80 mm).
• Height: 3.406 in (87 mm).
• Thread specification: M20 X 1.5-6H.

Engine Oil Specifications:

• American Petroleum Institute: API SP/CF
• SAE Viscosity Grade: 10W-40

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre semi synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 6L/5L/1L semi synthetic engine oil can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. Advanced Fluid Dynamics formula of the engine oil included in this kit reduces friction and provides absolute protection against engine wear from cold start to high operating temperature. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit has been specifically designed to suit Mazda vehicles fitted with B3, B3M1, B6, BPZE, BP, FPDE, FSDE, FSZE, FP and ZM I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 2.688 in (68 mm).
• Height: 2.875 in (73 mm).
• Thread specification: M20 X 1.5.

Engine Oil Specifications:

• American Petroleum Institute: API SP/CF
• SAE Viscosity Grade: 10W-40

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre semi synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 6L/5L/1L semi synthetic engine oil can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit features an Advanced Fluid Dynamics formula with enhanced additives that provides optimum fuel economy and maximum performance while keeping the emissions low. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit has been specifically designed to suit Mazda vehicles fitted with ZY, P5, PE-VPS, PY-VPS and PY I4 engines.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 2.688 in (68 mm).
• Height: 2.875 in (73 mm).
• Thread specification: M20 X 1.5.

Engine Oil Specifications:

• European Constructors: ACEA C5, A1/B1
• SAE Viscosity Grade: 5W-20
• Manufacturer Release: Ford WSS-M2C945-A, Ford WSS-M2C948-B, Jaguar Land Rover STJLR.03.5004

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 5L/1L full synthetic engine oil can be purchased through another listing.

This oil service kit is specifically designed to ensure the maximum lifespan of the engine. This kit has the necessary components required to protect and prevent engine wear through advanced technological formulation. The engine oil included in this kit features an Advanced Fluid Dynamics formula with enhanced additives that provides extreme fuel economy and maximum performance with high shear stability. The oil filter is designed to maintain peak performance, engine reliability and reduce engine wear. These replacements are extremely important in maintaining the health of your engine.

This oil service kit has been specifically designed to suit Mazda MX-5 fitted with the PE-VPS I4 engine.

Oil Filter Specifications:

• Style: Canister.
• Outside diameter: 2.688 in (68 mm).
• Height: 2.875 in (73 mm).
• Thread specification: M20 X 1.5.

Engine Oil Specifications:

• American Petroleum Institute: API SP
• International Lubricant Specification Advisory Committee: ILSAC GF-6A
• SAE Viscosity Grade: 0W-20

Contents:

• 1 X K&N Oil filter
• 1 X Nulon APEX+ 5 litre full synthetic engine oil

Vehicle Fitment Guide

Notes:

• Please refer to your vehicle service manual to ensure you are purchasing the correct engine oil for your motor according to the lubrication requirements and service intervals. If unsure, please contact us for assistance. Using the wrong engine oil may cause engine damage and/or void warranty.
• This engine oil is not recommended for heavy duty diesel engines.
• In accordance with the shipment regulations, this kit cannot be delivered to customers outside Australia as it includes engine oil.
• If you require a Nulon engine oil different from the one included in this kit, please contact us.
• A separate oil filter can be purchased through another listing.
• A separate 5 litre full synthetic engine oil can be purchased through another listing.